ST7MDT20-T6A/DVP STMicroelectronics, ST7MDT20-T6A/DVP Datasheet - Page 16

• Manufacturer Part Number: ST7MDT20-T6A/DVP
• Description: KIT CONNECTION ST7MDT20-DVP3
• Manufacturer: STMicroelectronics

Specifications of ST7MDT20-T6A/DVP

• Accessory Type: 64-TQFP Connection Kit
• For Use With/related Products: ST7MDT20-DVP3 Emulator
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3 - Connecting to your application board
3.3
16/38
TQFP64 (14 x 14) package
To connect the ST7MDT20-DVP3 to your application board when your target ST7
microcontroller is in the TQFP64 package, you will need the ST7MDT20-DVP3
with the ST7MDT20-T64/DVP adapter kit.
1 Ensure that the emulator and application board are powered off.
2 Connect one end of each of the three 50-pin flat cables to connectors J1, J2 and
3 Connect the other end of each of the three 50-pin flat cables to the TQFP80/64/
4 Solder the TQFP64 (14 x 14) socket onto your application board.
5 Fix the device adapter (ref.: DB531) to the socket soldered on your application
6 Connect the adapter to the device adapter as shown in
Refer to your ST7-DVP3 Emulator User Manual for information about connecting
your emulator to your PC.
J3 on the ST7MDT20-DVP3 TEB.
44 adapter (ref.: DB543), as shown in
board using the provided screws (see
adapter’s pin 1 indicator is aligned with the socket’s pin 1 indicator.
Flat cables
Adapter
Device adapter
Socket
Figure 9: Connection for TQFP64
Figure 9
Figure 9
ST7MDT20-DVP3 Probe User Guide
.
). Ensure that the device
Figure 9
Pin 1 indicators
(flat corner on the socket)
.