M3T-DUMMY80 Renesas Electronics America, M3T-DUMMY80 Datasheet - Page 4

• Manufacturer Part Number: M3T-DUMMY80
• Description: DUMMY IC FOR 80-PIN 0.8MM QFP (8
• Manufacturer: Renesas Electronics America

Specifications of M3T-DUMMY80

• Accessory Type: Dummy IC
• For Use With/related Products: 80-pin 0.8mm-pitch QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Outline
The M3T-DUMMY80 is an accessory tool product which
connects the emulator probe and target system. Its dimensions
are the same as those of an 80-pin 0.8-mm-pitch QFP (20 x 14
mm) IC package (80P6N-A).
2. Package Components (See Figure 1)
3. Applicable Sockets
The M3T-DUMMY80 has been tested with the following IC
sockets made by Matsushita Electric Works, Ltd. Be sure to use
them.
Socket main unit + socket frame (1 set):
AXS4803M195C (for 80P6N-A)
Socket frame for repair (200 pieces):
AXS4802M1 (for 80P6N-A)
4. Specifications
Table 1 Specifications
5. Usage (See Figure 2)
The M3T-DUMMY80 can be used for debugging and onboard
evaluation in common by mounting the socket main unit on the
target board.
(1) For debugging
(2) For onboard evaluation
Before using the M3T-DUMMY80, be sure to read “8.
Precautions” on page 4.
(1)
(2)
(3)
(4)
(5)
Applicable package
Max. permissible current
iterations of connector
Insulation resistance
Mount the socket main unit on the foot pattern of the
target board. And mount the M3T-DUMMY80 and socket
frame on it. Then attach the connector of the emulator.
Mount the socket main unit on the foot pattern of the
target board. Mount an MCU with on-chip flash memory
or one-time PROM on it. Then attach the socket frame on
it.
Insertion/removal
M3T-DUMMY80 main unit
Socket main unit
Socket frame (for 80P6N-A)
User’s manual (This manual)
User’s manual (Japanese)
(80-pin 0.8-mm-pitch QFP)
80P6N-A, 80P6N-C
20 times guaranteed
100M Ω or more
200 mA at 5 V
x 1
x 1
x 2
x 1
x 1
(2/4)
Figure 1 Package components
(3) Figure 2 Usage of the M3T-DUMMY80
For 80P6N-A, 80P6N-C
M3T-DUMMY80 main unit
(2) Socket main unit
(1) Debugging
(Color: white)
Be sure to align the pins.
: No. 1 pin
(1) M3T-DUMMY80 main unit
Emulator
Socket frame
(2) Onboard evaluation
Socket main unit
MCU (QFP)
Foot pattern
(3) Socket frame
For 80P6N-A
(Color: blue)