M38K29T-ADF Renesas Electronics America, M38K29T-ADF Datasheet - Page 8

• Manufacturer Part Number: M38K29T-ADF
• Description: DEV TEMPORARY TARGET BOARD FOR M
• Manufacturer: Renesas Electronics America

Specifications of M38K29T-ADF

• Accessory Type: Target Board
• For Use With/related Products: M38K09RFS, M38K29RFS
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

(3) Connect the RESET cable (white) and the GND cable (black) of the emulation pod to pin RESET
(4) Set the MCU type select switch of the M38000TL2-FPD to the RSS/RFS side.
(5) Connect an external power supply to pin Vcc (TP1) of the M38K29T-ADF. And connect the GND
Table 4.1 lists the correspondence of the connector cables and signals, and Figure 4.2 shows
connecting the cables to the M38K29T-ADF.
Table 4.1 Connector cables of the M38000TL2-FPD and applicable signals
Figure 4.2 Connecting the cables to the M38K29T-ADF
M38000TL2-FPD
(TP3) and pin Vss (TP2) of the M38K29T-ADF respectively. Leave the Vcc cable (yellow)
unconnected.
output of the power supply to pin Vss (TP2). Use a power supply whose rising time is 10 ms or
less.
Cable color
Yellow
White
Black
RSS/RFS side
No connection
RESET
Signal
Vss
( 6 / 14 )
Yellow cable
Black cable
No connection
White cable