HS3864ECH61H Renesas Electronics America, HS3864ECH61H Datasheet - Page 11

• Manufacturer Part Number: HS3864ECH61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS3864ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8/3864
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2
To connect the cable head to the user system, follow the instructions below.
2.2.1
After checking the location of pin 1 on the IC socket, apply epoxy resin adhesive to the bottom of
the IC socket for an FP-80A package, and fasten it to the user system before soldering.
2.2.2
After fastening, solder the IC socket for an FP-80A package to the user system. Be sure to
completely solder the leads so that the solder slops gently over the leads and forms solder fillets.
(Use slightly more solder than the MCU.)
2.2.3
Align pin 1 on the IC socket for an FP-80A package on the user system with pin 1 on the user system
interface cable head, and insert the user system interface cable head into the IC socket on the user
system, as shown in figure 3.
result in PERSONAL INJURY. The USER PROGRAM will be
LOST.
product before the USER SYSTEM INTERFACE CABLE
is connected to or removed from any part. Before connecting,
make sure that pin 1 on both sides are correctly aligned. Failure to
do so will damage the user system and the emulator product or will
Connecting User System Interface Cable to User System
Always switch OFF the user system and the emulator
Installing IC Socket
Soldering IC Socket
Inserting Cable Head
Check the location of pin 1 before inserting.
CAUTION
WARNING
5