HS3802ECH62H Renesas Electronics America, HS3802ECH62H Datasheet - Page 17

• Manufacturer Part Number: HS3802ECH62H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS3802ECH62H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8/3802
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.3
Align pin 1 on the IC socket for an FP-64E package on the user system with pin 1 on the user
system interface cable head, and insert the user system interface cable head into the IC socket on
the user system, as shown in figure 3.
2.2.4
6
1. Use a Philips-type screwdriver whose head matches
2. The tightening torque must be 0.13 N•m or less.
3. If the emulator does not operate correctly, cracks might
Inserting Cable Head
Check the location of pin 1 before inserting.
Fastening Cable Head
the screw head.
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
have occurred in the solder. Check conduction with
a tester and re-solder the IC socket if necessary.
CAUTION
CAUTION