HS2628ECH61H Renesas Electronics America, HS2628ECH61H Datasheet - Page 26

• Manufacturer Part Number: HS2628ECH61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS2628ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2628
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable head
2. The dimensions of the recommended mount pad for the user system IC socket are different from
3. This user system interface cable is specifically designed for the HS2628EPI61H emulator. Do
4. To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on the
5. While the emulator station is connected to the user system with the user system interface cable,
6. The P1 short connector is used for testing. Do not remove the jumper pin that is inserted in the
before inserting the cable head into the user system IC socket.
those of the MCU.
not use this cable with any other emulator station.
user system interface cable.
force must not be applied to the cable head. Place the emulator station, user system interface
cable, and user system as shown in the example in figure 10.
side of pin 1 and pin 2.
Figure 10 User System Interface Cable Location Example
Emulator station
Figure 11 P1 Short Connector
Section 5 Notice
Place components so that the cable body and cable head are
parallel to the user system.
Cable
1
3
P1
User system
Cable head is parallel
to emulator station
Cable head is parallel
to user system
15