HS2268ECN61H Renesas Electronics America, HS2268ECN61H Datasheet - Page 20

• Manufacturer Part Number: HS2268ECN61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS2268ECN61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2268
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2
To connect the cable head to the user system, follow the instructions below.
2.2.1
After checking the location of pin 1 on the IC socket fasten it to the user system before soldering.
Use the guide pins provided to determine where to install the IC socket, as shown in figure 3.
product before the USER SYSTEM INTERFACE CABLE
is connected to or removed from any part. Before
connecting, make sure that pin 1 on both sides are correctly
aligned. Failure to do so will result in a FIRE HAZARD and
will damage the user system, the emulator product, and the
expansion board or will result in PERSONAL
INJURY. The USER PROGRAM will be LOST.
apply epoxy resin adhesive to the end of the four projections
at the bottom of the IC socket, and fasten it to the user
system.
Connecting User System Interface Cable to User System
Always switch OFF the user system and the emulator
Installing IC Socket
After confirming the location of pin 1 on the IC socket,
CAUTION
WARNING
5