ATSTK600-ATTINY10 Atmel, ATSTK600-ATTINY10 Datasheet - Page 16

• Manufacturer Part Number: ATSTK600-ATTINY10
• Description: STK600-ATTINY10 SOCKET PACKAGE
• Manufacturer: Atmel
• Series: AVR®r

Specifications of ATSTK600-ATTINY10

• Module/board Type: Socket Module - ATtiny4, 5, 9 and 10
• Processor To Be Evaluated: STK600
• Processor Series: AVR, AVR32
• Supported Families: AVR
• Accessory Type: Router & Socket Card
• Development Tool Type: Hardware / Software - Starter Kit
• Mcu Supported Families: AVR, AVR32
• Rohs Compliant: Yes
• For Use With/related Products: STK600
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AVR Family Microcontrollers

6 Design example
16
AVR600
For an expansion card to report the ID 0xCF:
Figure 5-2. Expansion card id example
For a router card to report the ID 0xCC:
Figure 5-3. Routing card id example
To support a new package type one would typically start with designing the socket
card. The pinout between the socket card and routing card is not defined and left to
the designer. An example is given in figure 6-1
Next is the design of the routing card (figure 6-3). The routing cards role is to connect
each pin from the socket card to the corresponding pin on STK600. In addition to
decoupling etc, the routing card should also fan-out the correct signals to
programming headers.
Each card in the stack has its own board_id pins, the routing card is responsible for
passing on the signal to the socket card.
Route BOARD_ID0 to BOARD_ID6 and VCC to BOARD_ID7
Route BOARD_ID0 to both BOARD_ID2 and BOARD_ID3.
8170B-AVR-12/10