CX2032 Xeltek, CX2032 Datasheet - Page 60

• Manufacturer Part Number: CX2032
• Description: SOCKET ADAPTER 32PLCC SUPERPRO5K
• Manufacturer: Xeltek

Specifications of CX2032

• Module/board Type: *
• Positions/sockets: 32
• Accessory Type: PLCC32 (22.5*25 Socket Size) Adapter For SuperPro 5000/5004GP
• Rohs Compliant: Yes
• For Use With/related Products: SuperPro 5000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1037


Superpro
Verify compares the content of the buffer with that of the chip.
Read reads the content of the chip into the buffer. Open the Buffer Edit dialog
box to view the content. 
Notes: The system cannot read the content of encrypted chips. 
Blank_check checks if the device is in blank state, which is dependent on the
data manual. If filling the blank data buffer is selected when the devices are
selected, the programmer will fill all the HEX/ASCII buffer data with FF or 00
(Hex), and the fuse buffer with 1 or 0 after the device is selected. An encrypted
chip may be displayed as a blank chip. 
Notes: If there is any discrepancy, verification ceases and the system displays
®
5000 User’s Guide
the system displays an error message and ceases the programming.
The second mode does not perform verification during programming.
The process continues even if an error occurs. Upon completion, the
system displays a successful programming message. However, the
message only indicates successful completion of programming. You
must perform the verify function to ensure accuracy.
The system cannot read PLD devices since the test vector is not in
the chip.
If a chip includes ConfigWord, the system reads the ConfigWord data
and saves it to the ConfigWord buffer.
a failure message. For most memory chips and SCM chips, the failure
message includes address and data. For PLD devices, the message
displayed depends on the programming reference. Only the chips
that pass verification can be recognized as the chips being
programmed correctly.
Some chips do not provide the cell to cell check function. Instead, these
chips provide only the accumulation check function similar to the
VerifyCRC.
A few chips do not provide the accumulation check function. The system
performs the check automatically in the programming process.
60