PA14SO1-2006-3 Logical Systems Inc., PA14SO1-2006-3 Datasheet
![no-image](/images/no-image-200.jpg)
PA14SO1-2006-3
Manufacturer Part Number
PA14SO1-2006-3
Description
ADAPTER SOIC TO DIP
Manufacturer
Logical Systems Inc.
Datasheet
1.PA8SO1-2006-3.pdf
(1 pages)
Specifications of PA14SO1-2006-3
Module/board Type
Socket Module - SOIC
For Use With/related Products
PIC16C505
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
Q4407259
Body mm (inches)
Supported Device/Footprints
Using this adapter, many SOP packaged devices can be
programmed on DIP programmers.
The SOP socket accepts packages with the dimensions listed
below:
Adapter Construction
The adapter is made up of 2 sub-assemblies. They assemble via
connectors making the adapter modular. This way the sub-
assemblies can be replaced easily.
When disassembling the adapter take care not to bend the pins.
When reassembling the adapter note the pin 1 indicators to align
the parts correctly.
The following chart shows the various socket and board part
numbers that make us these adapters.
Test Socket
The 20 pin socket is depopulated for the lower pin counts. It is
depopulated at the Pin 1 end. If you remove the socket be sure to
replace it with the latch as shown in the picture.
Circuit Board
The 14 through 20 pin adapters are built using the same circuit
board: FP20-06. The board is depopulated at the Pin 1 end. The
various part numbers for this board are listed in the part number
chart above.
min.
4.9
(0.193)
Tip mm (inches)
min.
7.65
(0.301)
PA8SO1-2006-3
PA8SO1-2006-6
PA14SO1-2006-3(6)
PA16SO1-2006-3(6)
PA18SO1-2006-3(6)
PA20SO1-2006-3(6)
S Y
LSC #
20SD-06
xx(20H)SD-06
S
Adapter
T E M S
typ.
5.3
(0.209)
typ.
7.8
(0.307)
Logical Systems Corporation
PO Box 6184, Syracuse, NY 13217-6184 USA
Tel (315) 478-0722, FAX (315) 479-6753
www.logicalsys.com, Email: info@logicalsys.com
Style
Lidded ZIF
Lidded ZIF
max.
5.4
(0.213)
max.
n/a
PAxxSO1-2006-3 or -6 Data Sheet
8(20H)SD-06
8(20H)SD-06
14(20H)SD-06
16(20H)SD-06
18(20H)SD-06
20SD-06
8-20 Pin SOP socket/8-20 Pin DIP 0.3" or 0.6" plug
Knee mm (inches)
min.
n/a
Body Length
n/a
Socket
Mfgr/Pn
Enplas FP-20-1.27-06
Enplas FP-xx(20H)-1.27-06
typ.
6.8
(0.268)
FP8-06-3
FP8-06-6
FP20-06-14-3(6)
FP20-06-16-3(6)
FP20-06-18-3(6)
FP20-06-3(6)
max.
7.1
(0.279)
Lead
Pitch
1.27
(0.50)
Board
Adapter Dimensions
Adapter Wiring
The adapter is wired 1-1. Pin 1 of the device connects to pin 1 of
the DIP footprint, pin 2 to pin 2, and so on around the adapter.
PAxxSO1-2006-3 or -6
PA8SO1-2006-3
PA8SO1-2006-6
PAxxSO1-2006-3(6) Data Sheet
Doc: 2006.DOC
Rev: 10/05/00
Page 1 of 1