MCP73871DM-VPCC Microchip Technology, MCP73871DM-VPCC Datasheet - Page 24

• Manufacturer Part Number: MCP73871DM-VPCC
• Description: DEMO BOARD FOR MCP73871
• Manufacturer: Microchip Technology

Specifications of MCP73871DM-VPCC

• Main Purpose: Power Management, Battery Charger
• Embedded: No
• Utilized Ic / Part: MCP73871
• Primary Attributes: 1 Cell- Li-Ion / Li-Pol, 4.2V @ 100 ~ 500mA: USB, 1A: AC Adaptor
• Secondary Attributes: Safety Timer, Thermal Protection, Automatic Charge Termination and Recharge
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP73871
5.2.3
Driving the PROG2 input to a logic Low selects the low
USB port source current setting (maximum 100 mA).
Driving the PROG2 input to a logic High selects the
high USB port source current setting (Maximum
500 mA).
5.2.4
The power-good (PG) option is a pseudo open-drain
output. The PG output can sink current, but not source
current. However, there is a diode path back to the
input, and as such, the output should only be pulled up
to the input. The PG output is low whenever the input
to the MCP73871 device is above the UVLO threshold
and greater than the battery voltage. The PG output
can be used as an indication to the system that an input
source other than the battery is supplying power.
DS22090B-page 24
USB PORT CURRENT
REGULATION SELECT (PROG2)
POWER-GOOD (PG)
5.2.5
The timer enable (TE) input option is used to enable or
disable the internal timer. A low signal on this pin
enables the internal timer and a high signal disables
the internal timer. The TE input can be used to disable
the timer when the charger is supplying current to
charge the battery and power the system load. The TE
input is compatible with 1.8V logic.
TIMER ENABLE (TE) OPTION
© 2009 Microchip Technology Inc.