IS18WWC1W-K NKK Switches, IS18WWC1W-K Datasheet - Page 8
![DESIGN KIT FOR OLED ROCKER](/photos/9/4/90477/mfg_is18wwc1w-k_sml.jpg)
IS18WWC1W-K
Manufacturer Part Number
IS18WWC1W-K
Description
DESIGN KIT FOR OLED ROCKER
Manufacturer
NKK Switches
Series
SmartSwitch™r
Specifications of IS18WWC1W-K
Main Purpose
Switches with Programmable Display
Utilized Ic / Part
SmartSwitch™OLED Rocker Switch
Primary Attributes
OLED Rocker Switch
Description/function
SMARTSWITCH Development Kit
Maximum Operating Temperature
+ 70 C
Operating Voltage
2.7 V to 5.5 V
For Use With
360-2421 - SMARTSWITCH DEVELOPMENT KIT 8360-2420 - SMARTSWITCH EVAL KIT OLED ROCKERIS-INT DEV KIT-8 - SMARTSWITCH INT DEVELOPMENT KITD
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Secondary Attributes
-
Embedded
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
OLED Smartswitch Rocker
Other names
360-2419
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: smartswitch@nkkswitches.com
DEVELOPMENT TOOLS
PRECAUTIONS FOR HANDLING & STORAGE
NKK Switches offers a variety of development tools. These tools include software that may be downloaded
from www.nkksmartswitch.com.
In addition to standard configurations, NKK can provide custom solutions for the most complex design
challenges. Contact factory for information and support regarding your custom applications.
Development Kits provide a full set of tools for designs. The Dev Kits enable rapid prototype designs so
that feedback is easily obtained. NKK’s Development Kits have been designed to facilitate the creation,
testing and displaying of images with software downloaded from www.nkksmartswitch.com. Click on
“Download Software.”
Handling
1. OLED devices are electrostatic sensitive.
2. Signal input under conditions not recommended may cause damage to the OLED unit or deterioration of the display.
3. If the OLED panel is broken, avoid touching the contents. Wash off in case of contact to the skin or clothing.
4. Limit operating force to 100.0N maximum, as excessive pressure may damage the display.
5. Under certain actuation conditions, one side of the rocker and the center switch can both send actuation signals.
6. Pixels acquire diminished brightness over time and use, and those most frequently habituated have greater reduction of
7. Clean actuator surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using neutral cleanser and
Storage
1. Store in original container and away from direct sunlight.
2. Keep away from static electricity.
3. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination.
Panel Mounting
•
•
•
•
•
•
•
Follow directions regarding supply sequences of power and signal voltages.
brightness than those less used. To minimize this difference, operate OLED unit so that all pixels are used as consistently
as possible.
dry with clean cloth. Do not use organic solvent.
Before snapping a switch into the panel, align the
gasket evenly under the bezel of the switch.
When mounting into a panel, apply equal pressure
to sides of bezel and insert parallel to the panel.
After mounting, be sure there are no gaps between switch and panel. Lightly push into panel.
After installing into panel, do not apply excessive force.
After panel installation and wiring is completed, do not apply force horizontally or
vertically from behind panel.
Behind the panel, cut area should be squared. If front of panel is painted, do not allow any paint
to collect in corners of cutout to prevent level mounting.
Avoid reinstalling a switch once it has been mounted into panel. This may cause deterioration of
panel sealability.
OLED SMARTSWITCH
Gasket position must be even with no gaps beneath bezel
Incorrect
Gasket secure and flush against bezel
TM
SENSITIVE DEVICES
Rocker
ELECTROSTATIC
ATTENTION
Correct
Clean Edges
8