IS-DEV KIT-1 NKK Switches, IS-DEV KIT-1 Datasheet - Page 10
![SMARTSWITCH DEVELOPMENT KIT 1](/photos/9/5/90520/mfg_is-dev_kit-1_sml.jpg)
IS-DEV KIT-1
Manufacturer Part Number
IS-DEV KIT-1
Description
SMARTSWITCH DEVELOPMENT KIT 1
Manufacturer
NKK Switches
Series
SmartSwitch™r
Datasheet
1.IS-DEV_KIT-1.pdf
(15 pages)
Specifications of IS-DEV KIT-1
Main Purpose
Switches with Programmable Display
Utilized Ic / Part
SmartSwitch™LCD Display
Primary Attributes
LCD Display Module, 2 Tact Switches, with Flash Memory
Secondary Attributes
Up to 255 Pictures and Attributes
Description/function
SMARTSWITCH Development Kit
For Use With
360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
Lead Free Status / RoHS Status
Not applicable / Not applicable
Embedded
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
Smart Switch - Part IS-SO108
Other names
360-2325
7850 East Gelding Drive • Scottsdale, AZ 85260-3420
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[Legend Block] is 125 bytes and must be sent in ASCII HEX format.
The LCD/LED code is not transferred to LCD/LED code refresh block.
Command to download Attribute data to a specified Address
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[Attribute block] is 16 bytes of Addresses and must be sent in ASCII HEX format.
Command to Download Pointers
Upon receiving this command, the controller transfers the data from EEPROM to internal RAM according to
the pointer. If the pointer value is zero, no transfer takes place.
Command to Download LED codes
Upon receiving this command, The LED backlights will be according to the LED codes.
Command to Download ASCII string (7x10 fonts)
Command to Download ASCII string (5x7 fonts)
IS-Dev Kit-1 Users Manual A.doc
This command downloads the Attribute data to a specified Address.
command format: 2AH [Address] [Attribute block]
transmit format:
command format: 2DH [00H] [Pointer]
transmit format:
command format: 2CH [00H] [LED code] [JB LED code]
transmit format:
command format:
transmit format:
[code] is a byte with B0 to B3 of LED code as lower nibble and B0 to B3 of JB LED code as higher
nibble.
[ASCII string] is 8 characters. The controller will make two lines of 4 characters using the 7x10 fonts.
command format:
transmit format:
[code] is a byte with B0 to B3 of LED code as lower nibble and B0 to B3 of JB LED code as higher nibble.
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone 480.991.0942 • Fax 480.998.1435
(xxH)
(xxH) (xxH) (xxAH)
(xxH) (xxH)
(xxH) (xxH) (xxAH)
(xxH) (xxH) (xxAH)
22H
22H
www.nkkswitches.com • Email engineering@nkkswitches.com
[06H] [code]
[07H] [code]
(xxAH)
IS-Dev Kit-1 Users Manual
(xxAH)
(xxAH)
[ASCII string]
[ASCII string]
(xxH)
(xxH)
(xxAH)
[30H]
(xxH)
[30H]
(xxH)
Page 10 of 15
0110