IS-DEV KIT-8 NKK Switches, IS-DEV KIT-8 Datasheet - Page 21

• Manufacturer Part Number: IS-DEV KIT-8
• Description: SMARTSWITCH DEVELOPMENT KIT 8
• Manufacturer: NKK Switches
• Series: SmartSwitch™r

Specifications of IS-DEV KIT-8

• Main Purpose: Switches with Programmable Display
• Utilized Ic / Part: SmartSwitch™OLED Rocker Switch
• Primary Attributes: OLED Rocker Switch
• Description/function: SMARTSWITCH Development Kit
• Maximum Operating Temperature: + 70 C
• Operating Voltage: 2.7 V to 5.5 V
• For Use With: 360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Embedded: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: OLED Smartswitch Rocker
• Other names: 360-2421

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
[address] is two bytes with value of 0001H to FFFFH sent as ASCII HEX format.
[attribute block] is fourteen bytes transmit in ASCII HEX format.
The address and attribute block are saved at this address. When the controller reads the attribute block it
compares the requested address to the saved address and if they do not match controller knows that the
attribute block is not programmed and ignores it.
Image and Attribute block
Attribute Block:
An attribute is handled as a block of 14 bytes. Table below show the transmit order of the data.
Command to upload an attribute block
This command uploads an attribute block from the EEPROM location to the host.
IS-Dev Kit 8 Users Manual A.doc
command format: 2BH
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
(xxH) (xxH) (xxAH)
www.nkkswitches.com • Email [e-mail]
Byte
10
11
12
13
14
55H
1
2
3
4
5
6
7
8
9
IS-Dev Kit-8 User Manual
[address]
High byte of action address for
Top Switch.
Low byte of action address for
Top Switch.
High byte of action address for
Middle Switch.
Low byte of action address for
Middle Switch.
High byte of action address for
Bottom Switch.
Low byte of action address for
Bottom Switch.
High byte of end address.
Low byte of end address.
Timer 1
Timer 2
High byte of action address for
Left Switch. Reserved. (0000)
Low byte of action address for
Left Switch. Reserved. (0000)
High byte of action address for
Right Switch. Reserved. (0000)
Low byte of action address for
Right Switch. Reserved. (0000)
Description
Page 21 of 31
1209