IS-DEV KIT-7D NKK Switches, IS-DEV KIT-7D Datasheet - Page 18
![KIT DEV FOR OLED DISPLAY](/photos/9/5/90536/is-dev_kit-7d_sml.jpg)
IS-DEV KIT-7D
Manufacturer Part Number
IS-DEV KIT-7D
Description
KIT DEV FOR OLED DISPLAY
Manufacturer
NKK Switches
Series
SmartSwitch™r
Specifications of IS-DEV KIT-7D
Main Purpose
Switches with Programmable Display
Embedded
Yes, ASIC
Utilized Ic / Part
ISC01P
Primary Attributes
2 OLED Switches, PC Board with Flash Memory
Secondary Attributes
Power and Programming Connections
Description/function
SMARTSWITCH Development Kit
For Use With
360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With/related Products
Smart Switch - OLED
Other names
360-2340
7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Commands to download information directly to OLED modules
Note: Care must be taken using these commands. The OLED modules could get damaged if they are
initialized with a value exceeding the specifications. Please check the OLED modules data sheet and
application notes before using commands.
Command to download data directly to OLED modules
[number] is one byte sent in ASCII HEX format (01H to 80H). This is the number of data bytes (1 to 128
bytes).
[data] is 1 to 128 bytes sent in ASCII HEX format.
The controller sends the [data] to both OLED modules as data.
Command to download a command directly to OLED modules
[number] is one byte sent in ASCII HEX format (01H to 80H). This is the number of data bytes (1 to 128
bytes).
[data] is 1 to 128 bytes sent in ASCII HEX format.
The controller sends the [data] to both OLED modules as a command.
Command to download a command directly to OLED modules (special)
[number] is one byte sent in ASCII HEX format (01H to 80H). This is the number of data bytes (1 to 128
bytes).
[data] is 1 to 128 bytes sent in ASCII HEX format.
The controller turns off the OLED display switches, sends the [data] to both switches as a command and then
turns on the OLED display switches.
CL01 Intelligent Controller Users Manual B.doc
This command downloads data directly from the host to the OLED module.
This command downloads a command from the host to the OLED module.
This command turns off the OLED module, downloads a command from the host to the OLED module,
and turns it back on.
command format: 2FH
transmit format:
command format: 2FH
transmit format:
command format: 2FH
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone 480.991.0942 • Fax 480.998.1435
CL01 Intelligent Controller Users Manual
(xxH) (xxH) (xxAH)
(xxH) (xxH) (xxAH)
(xxH) (xxH) (xxAH)
www.nkkswitches.com • Email engineering@nkkswitches.com
53H
47H
49H
[number]
[number]
[number]
(xxAH)
(xxAH)
(xxAH)
[data]
[data]
[data]
Page 18 of 24
0110