EZ80L920210ZCO Zilog, EZ80L920210ZCO Datasheet - Page 9

• Manufacturer Part Number: EZ80L920210ZCO
• Description: KIT DEV EZ80 WEB SERVER
• Manufacturer: Zilog
• Series: eZ80®r

Specifications of EZ80L920210ZCO

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: eZ80L92
• Primary Attributes: *
• Secondary Attributes: *
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3165; EZ80L920210ZCO; Q1370684

Changing ZPAKII Settings to Match the PC
There are two ways to change the ZPAKII’s default settings. One method is via the
ZPAKII embedded web page via a browser over an Ethernet connection. The other way is
via the ZPAKII console port. The following steps describe the console port method.
1. The serial port of the PC should already be connected to the console serial port of the
2. Launch HyperTerminal on the PC by navigating from the Start menu to Programs
3. Create a new connection in HyperTerminal by selecting the appropriate COM port in
4. If you select COM1, the COM1 Properties dialog appears. Enter the following port
5. Ensure that the connection is in the Connected state by observing the HyperTerminal
6. While holding down the z key (lowercase) on the PC’s keyboard, press the RESET
QS001507-0203
Note:
Note:
the next section; otherwise, proceed to the section entitled
on page 11.
ZPAKII unit.
Terminal, depending upon your Windows OS.
the Connect using: field of the Connect To dialog. Click OK.
settings and click OK.
status bar. If not connected, select Connect from the Call menu.
button on the side of the ZPAKII. Releasing the z key displays a ZPAKII console
boot-up message in HyperTerminal, followed by the
2
To change the ZPAKII settings from their defaults via a web browser, please consult the
Debug Interface Tool Product User Guide
Accessories
Bits per second:
Data bits:
Parity:
Stop bits:
Flow control:
This connection is a direct connection via a COM port, not a modem.
To locate the Reset button, view the ZPAKII debug interface tool with the
XTools® logo reading top-side up. The Reset button is recessed within the
HyperTerminal or Accessories
57600
8
None
2
None
(PUG0015).
ZPAK
Communications
eZ80L92 Development Kit
Running Sample Projects
prompt, as shown below.
Configure the Hardware
Quick Start Guide
ZPAKII
Hyper-
Page 9
2