FPDXSDUR-43USB/NOPB National Semiconductor, FPDXSDUR-43USB/NOPB Datasheet - Page 13

• Manufacturer Part Number: FPDXSDUR-43USB/NOPB
• Description: KIT EVAL DS99R421 CONV TO LVDS
• Manufacturer: National Semiconductor

Specifications of FPDXSDUR-43USB/NOPB

• Main Purpose: Interface, Serializer, Deserializer (SERDES)
• Utilized Ic / Part: DS90UR124, DS99R421
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Other names: FPDXSDUR-43USB

Note:
Vcc and Gnd MUST be
applied externally here
(UNSTUFFED)
J2
J1 (BACKSIDE)
DS90UR124 Rx De-serializer Board:
The USB connector J2 (mini USB) on the topside of the board provides the interface
connection for FPD-Link II signals to the Serializer board. Note: J1 (mini USB) on the
bottom side is un-stuffed and not used with the cable provided in the kit.
The SERDES de-serializer board is powered externally from the J4 (VDD) and J5 (VSS)
connectors shown below. For the de-serializer to be operational, the Power Down
(RPWDNB) and Receiver Enable (REN) switches on S1 and S2 must be set HIGH.
Rising or falling edge reference clock is also selected by S1: HIGH (rising) or LOW
(falling).
The 50 pin IDC Connector J3 provides access to the 24 bit LVCMOS and clock outputs.
S1
S2
J4, J5
National Semiconductor Corporation
JP3
Date: 5/12/2008
Page 13 of 39
FPD-Link II INPUTS
LVCMOS OUTPUTS
FUNCTION CONTROLS
POWER SUPPLY
JP4
J3