MAX9526EVKIT+ Maxim Integrated Products, MAX9526EVKIT+ Datasheet - Page 3

• Manufacturer Part Number: MAX9526EVKIT+
• Description: EVALUATION KIT FOR MAX9526
• Manufacturer: Maxim Integrated Products

Specifications of MAX9526EVKIT+

• Main Purpose: Video, Video Processing
• Embedded: No
• Utilized Ic / Part: MAX9526
• Primary Attributes: NTSC/PAL Digital Video Decoder
• Secondary Attributes: ITU-Compliant Output
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

• MAX9526 EV kit (USB cable included)
• User-supplied Windows 2000/XP- or Windows Vista-
• 5V, 500mA DC power supply
• Video signal generator (e.g., Tektronix TG-2000 or
• Component analog or parallel/serial digital video
• Component analog video monitor
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and
underlined refers to items from the Windows operating
system.
The MAX9526 EV kit is fully assembled and tested.
Follow the steps below to verify board operation.
Caution: Do not turn on the power supply until all
connections are completed.
1) Visit
2) Install the EV kit software on your computer by run-
Note: Indicate that you are using the MAX9526 when contacting these component suppliers.
Hong Kong X’tals Ltd.
Murata Electronics North America, Inc.
Taiyo Yuden
TDK Corp.
compatible PC with a spare USB port
similar)
measurement equipment
load the latest version of the EV kit software,
9526Rxx.ZIP. Save the EV kit software to a tempo-
rary folder and uncompress the ZIP file.
ning the 9526Rxx.msi program inside the temporary
folder. The program files are copied and icons are
created in the Windows Start | Programs menu.
www.maxim-ic.com/evkitsoftware
SUPPLIER
_______________________________________________________________________________________
USB_Driver_Help.PDF
Recommended Equipment
MAX9526.EXE
FTD2XX.INF
FILE
Quick Start
Procedure
to down-
852-35112388
770-436-1300
800-348-2496
847-803-6100
PHONE
MAX9526 Evaluation Kit
Application program
USB device driver file
USB driver installation help file
3) Verify jumper settings (see Table 1).
4) Connect external 5V, 500mA power supply to
5) Connect the output of the video signal generator to
6) Connect the H1 header from the EV kit to an ITU-
7) Optionally, connect component video monitor to the
8) Set the video signal generator for the desired AC-
9) Turn on the power supply and enable the video sig-
10) Connect the USB cable from the PC to the EV kit
11) Follow the directions of the Add New Hardware
banana jacks P1 (+) and P2 (-) and verify that
jumper JU1 is in the 1-2 position.
the IN1A RCA connector on the MAX9526 EV kit.
compatible bit-parallel interface measurement
equipment.
U/BLUE, Y/GREEN, and V/RED BNC connectors
from the EV kit.
coupled PAL or NTSC video input signal.
nal generator.
board. A Building Driver Database window pops
up in addition to a New Hardware Found message
when installing the USB driver for the first time. If a
window is not seen that is similar to the one
described above after 30s, remove the USB cable
from the board and reconnect it. Administrator privi-
leges are required to install the USB device driver
on Windows.
Wizard to install the USB device driver. Choose the
Search for the best driver for your device option.
Specify the location of the device driver to be
www.hongkongcrystal.com
www.murata-northamerica.com
www.t-yuden.com
www.component.tdk.com
DESCRIPTION
MAX9526 EV Kit Files
Component Suppliers
WEBSITE
3