MAX5432EVKIT+ Maxim Integrated Products, MAX5432EVKIT+ Datasheet - Page 2

• Manufacturer Part Number: MAX5432EVKIT+
• Description: KIT EVAL FOR MAX5432
• Manufacturer: Maxim Integrated Products

Specifications of MAX5432EVKIT+

• Main Purpose: Digital Potentiometer
• Utilized Ic / Part: MAX5432
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MAX5432 Evaluation Kit
Before beginning, the following equipment is needed:
•
•
•
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and under-
lined refers to items from the Windows operating system.
The MAX5432 EV kit is fully assembled and tested.
Follow the steps below to verify board operation:
1) Visit www.maxim-ic.com/evkitsoftware to download
µMAX is a registered trademark of Maxim Integrated Products, Inc.
2
DESIGNATION
_______________________________________________________________________________________
MAX5432 EV kit (USB cable included)
A user-supplied Windows 2000/XP/Vista-compatible
PC with a spare USB port
Ohmmeter
the latest version of the EV kit software, 5432Rxx.ZIP.
R8–R11
U7, U8
R6, R7
R12
R1
R2
R3
R4
R5
U1
U2
U3
U4
U5
U6
QTY
1
1
1
1
1
2
4
1
1
1
1
1
1
1
2
0Ω ±5% resistor (0603)
220Ω ±5% resistor (0603)
10kΩ ±5% resistor (0603)
2.2kΩ ±5% resistor (0603)
1.5kΩ ±5% resistor (0603)
27Ω ±5% resistors (0603)
2kΩ ±5% resistors (0603)
100kΩ ±5% resistor (0603)
Nonvolatile linear taper digital
potentiometer (8-pin TDFN-EP*)
Maxim MAX5432LETA+
32-bit microcontroller
(68-pin QFN-EP*, 10mm x 10mm)
Maxim MAXQ2000-RAX+
93C46 type 3-wire EEPROM 16-bit
architecture (8-pin SO)
UART-to-USB converter
(32-pin TQFP, 7mm x 7mm)
3.3V regulator (5-pin SC70)
Maxim MAX8511EXK33+
2.5V regulator (5-pin SC70)
Maxim MAX8511EXK25+
Low-voltage level translators
(10-pin µMAX
Maxim MAX1840EUB+
Required Equipment
DESCRIPTION
®
)
Quick Start
Procedure
2) Install the EV kit software on the computer by run-
3) Verify that a shunt is installed on pins 1-2 of jumper
4) Verify that a shunt is installed on jumpers JU2 and
5) Verify that a shunt is installed on jumper JU4. This
6) Verify that no shunts are installed on jumpers JU5 and
* EP = Exposed pad.
Note: Indicate that you are using the MAX5432 or MAX5433
when contacting these component suppliers.
Note: The MAX5432 EV kit software can be downloaded from
www.maxim-ic.com/evkitsoftware.
M ur ata M fg . C o., Ltd . 770-436-1300 www.murata.com
Panasonic Corp.
TDK Corp.
USB_Driver_Help.PDF USB driver installation help file
DESIGNATION
Save the EV kit software to a temporary folder and
uncompress the ZIP file.
ning the INSTALL.EXE program inside the tempo-
rary folder. The program files are copied and icons
are created in the Windows Start | Programs menu.
JU1. This configures the MAX5432 IC’s VDD to operate
from the 3.3V generated by the USB interface circuit.
JU3. This configures the I
signals from the USB interface circuit.
configures the MAX5432LETA I
JU6, the L PCB pad is not connected to GND, and
the H PCB pad is not connected to the W PCB pad.
MAX5432.EXE
INSTALL.EXE
SUPPLIER
FTD2XX.INF
UNINST.INI
Y1
Y2
—
—
—
FILE
Component List (continued)
QTY
1
1
6
1
1
800-344-2112 www.panasonic.com
847-803-6100 w w w .com p onent.td k.com
MAX5432 EV Kit Files
Component Suppliers
Installs the EV kit files on the computer
Application program
USB driver file
Uninstalls the EV kit software
16MHz crystal
6MHz crystal
Shunts
USB high-speed A-to-B cable, 6ft
PCB: MAX5432 Evaluation Kit+
PHONE
2
C input pins to receive
DESCRIPTION
DESCRIPTION
2
C address to 0x50.
WEBSITE