DS3112DK Maxim Integrated Products, DS3112DK Datasheet - Page 48
DS3112DK
Manufacturer Part Number
DS3112DK
Description
KIT DEMO FOR DS3112
Manufacturer
Maxim Integrated Products
Datasheet
1.DS3112.pdf
(133 pages)
Specifications of DS3112DK
Main Purpose
Interface, Crosspoint Switch/Multiplexer
Utilized Ic / Part
DS3112
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Secondary Attributes
-
Embedded
-
Primary Attributes
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
- Current page: 48 of 133
- Download datasheet (3Mb)
DS3112
5 T3/E3 FRAMER
On the receive side, the T3/E3 framer locates the frame boundaries of the incoming T3 or E3 data stream
and monitors the data stream for alarms and errors. Alarms are detected and reported in T3/E3 Status
Register (T3E3SR) and the T3/E3 Information Register (T3E3INFO), which are described in Section 5.3.
Errors are accumulated in a set of error counters (Section 5.4). The host can force the T3/E3 framer to
resynchronize via the T3E3RSY control bit in the MRID register (Section 4.1). On the transmit side, the
device formats the outgoing data stream with the proper framing pattern and overhead and can generate
alarms. It can also inject errors for diagnostic testing purposes (T3E3EIC register). The transmit side of
the framer is called the “formatter.”
The T3/E3 framer and formatter can be used in conjunction with the multiplexer or as a stand-alone
framer. This selection is made in the Master Configuration 1 (MC1) register (Section 4.2).
5.1 T3/E3 Line Loopback
The line loopback loops the incoming T3/E3 data (the HRCLK, HRPOS, and HRNEG inputs) directly
back to the transmit side (the HTCLK, HTPOS, and HTNEG outputs). When this loopback is enabled, the
incoming receive data continues to pass through the device but the data output from the T3/E3 formatter
is replaced with the data being input to the device. See the block diagrams in Section
1
for a visual
description of this loopback.
5.2 T3/E3 Diagnostic Loopback
The diagnostic loopback loops the outgoing T3/E3 data from the T3/E3 formatter back to receive side
framer. When this loopback is enabled, the incoming receive data at HRCLK, HRPOS, and HRNEG is
ignored. See the block diagrams in Section
1
for a visual description of this loopback. Please note that the
device can still generate AIS at the HTCLK, HTPOS, and HTNEG outputs when this loopback is
invoked. This is important to keep the data that is being looped back from disturbing downstream
equipment.
5.3 T3/E3 Payload Loopback
The payload loopback loops the framed T3/E3 data from the receive side framer back to the transmit side
formatter. When this loopback is enabled, the incoming receive data continues to pass through the device
but the data normally being input to the T3/E3 formatter is ignored. See the block diagrams in Section
1
for a visual description of this loopback.
48 of 133
Related parts for DS3112DK
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
IC MUX TEMPE T3/E3 256-BGA
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
IC MUX TEMPE T3/E3 256-BGA
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
IC MUX T3/E3 3.3V 256-PBGA
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
MAX7528KCWPMaxim Integrated Products [CMOS Dual 8-Bit Buffered Multiplying DACs]
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Single +5V, fully integrated, 1.25Gbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Single +5V, fully integrated, 155Mbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
VRD11/VRD10, K8 Rev F 2/3/4-Phase PWM Controllers with Integrated Dual MOSFET Drivers
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Highly Integrated Level 2 SMBus Battery Chargers
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Current Monitor and Accumulator with Integrated Sense Resistor; ; Temperature Range: -40°C to +85°C
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
QFN 16/A°/AC-DC and DC-DC Peak-Current-Mode Converters with Integrated Step
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TDFN/A/65V, 1A, 600KHZ, SYNCHRONOUS STEP-DOWN REGULATOR WITH INTEGRATED SWI
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
Integrated Temperature Controller f
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products