MCP1630DM-DDBK4 Microchip Technology, MCP1630DM-DDBK4 Datasheet - Page 13

• Manufacturer Part Number: MCP1630DM-DDBK4
• Description: BOARD CONV DEMO MCP1630 TRPL-OUT
• Manufacturer: Microchip Technology
• Type: DC/DC Switching Converters, Regulators & Controllersr

Specifications of MCP1630DM-DDBK4

• Main Purpose: DC/DC, Step Down
• Outputs And Type: 3, Non-Isolated
• Voltage - Output: 3.3V, 1.2V, 4.7V
• Current - Output: 1.2A, 600mA, 150mA
• Voltage - Input: 6.5 ~ 40V
• Regulator Topology: Buck
• Frequency - Switching: 250kHz
• Board Type: Fully Populated
• Utilized Ic / Part: MCP1630
• Silicon Manufacturer: Microchip
• Application Sub Type: PWM Controllers
• Kit Application Type: Power Management - Voltage Regulator
• Silicon Core Number: MCP1630, PIC12F683
• Input Voltage: 6.5 V to 40 V
• Output Voltage: 1.2 V to 4.7 V
• Product: Power Management Modules
• Kit Contents: Board
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Power - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: MCP1630, PIC12F683
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Not applicable / Not applicable

4.6
When the input voltage (V
threshold, the V
ensure that, if the voltage is not adequate to operate
the MCP1630/V, the main power supply switch will be
held in the off state. When the UVLO threshold is
exceeded, there is some hysteresis in the input voltage
prior to the UVLO off threshold being reached. The
typical hysteresis is 75 mV. Typically, the MCP1630 will
not start operating until the input voltage at V
between 3.0V and 3.1V.
© 2005 Microchip Technology Inc.
Undervoltage Lockout (UVLO)
EXT
is held in the low state. This will
IN
) is less than the UVLO
IN
is
MCP1630/MCP1630V
4.7
To protect the V
MCP1630/V V
junction temperature is above the thermal shutdown
threshold. There is an internal 100 k pull-down resis-
tor connected from V
pull-down during overtemperature conditions. The
protection is set to 150°C (typ.), with a hysteresis of
18°C.
Overtemperature Protection
EXT
EXT
output will be high-impedance if the
output if shorted to V
EXT
to ground to provide some
DS21896B-page 13
IN
or GND, the