AS1339 EB austriamicrosystems, AS1339 EB Datasheet - Page 3

• Manufacturer Part Number: AS1339 EB
• Description: BOARD EVAL AS1339
• Manufacturer: austriamicrosystems

Specifications of AS1339 EB

• Main Purpose: DC/DC, Step Down with LDO
• Outputs And Type: 3, Non-Isolated
• Voltage - Output: 0.8 ~ 3.75 V, 2.85V, 2.85V
• Current - Output: 650mA
• Voltage - Input: 2.7 ~ 5.5 V
• Regulator Topology: Buck
• Frequency - Switching: 2MHz
• Board Type: Fully Populated
• Utilized Ic / Part: AS1339
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Power - Output: -

AS1339
Datasheet - P i n o u t
Table 1. Pin Description
www.austriamicrosystems.com/DC-DC_Step-Down/AS1339
IN1B, IN1A
Pin Name
PAB, PAA
LDO1
TEST
EN1
IN2
Pin Number
D3, D4
C3, C4
C1
C2
D1
D2
Supply Voltage Input for LDO1 and LDO2. Connect IN2 to a battery or
supply voltage from 2.7V to 5.5V. Decouple IN2 with a 1μF ceramic
capacitor as close as possible to IN2 and AGND. Connect IN2 to the same
source as IN1A and IN1B.
NC. Used for internal test purpose. The pin is internally pulled down with a
110kΩ resistor.
Supply Voltage Input for PA Step-Down Converter. Connect IN1A/B to a
battery or supply voltage from 2.7V to 5.5V. Decouple IN1A/B with a 10μF
ceramic capacitor as close as possible to IN1A/B, and PGND. IN1A and
IN1B are internally connected together. Connect IN1A/B to the same source
as IN2.
10mA LDO Regulator 1 Output. Decouple LDO1 with a 0.1μF ceramic
capacitor as close as possible to LDO1 and AGND. LDO1 is internally pulled
down through a 100Ω resistor when this regulator is disabled.
Enable Input for LDO1. For normal operation, connect to logic-high. For
shutdown mode, connect to logic-low. The pin is internally pulled down
through a 110kΩ resistor.
PA Connection for Bypass Mode. Internally connected to IN1A/B using
the internal bypass MOSFET during bypass mode. Connect PAA/B with a
4.7μF ceramic capacitor as close as possible to PAA/B and PGND.
Revision 1.05
Description
3 - 25