MCP6V01RD-TCPL Microchip Technology, MCP6V01RD-TCPL Datasheet - Page 5

• Manufacturer Part Number: MCP6V01RD-TCPL
• Description: REF DESIGN THERMCPL FOR MCP6V01
• Manufacturer: Microchip Technology

Specifications of MCP6V01RD-TCPL

• Channels Per Ic: 1 - Single
• Amplifier Type: Chopper (Zero-Drift)
• Output Type: Rail-to-Rail
• Slew Rate: 0.5 V/µs
• Current - Output / Channel: 22mA
• Operating Temperature: -40°C ~ 125°C
• Voltage - Supply, Single/dual (±): 1.8 V ~ 5.5 V
• Board Type: Fully Populated
• Utilized Ic / Part: MCP6V01
• Silicon Manufacturer: Microchip
• Silicon Core Number: MCP6V01
• Kit Application Type: Sensing - Temperature
• Application Sub Type: Temperature Sensor
• Processor To Be Evaluated: MCP6V01
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Current - Supply (main Ic): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

INTRODUCTION
DOCUMENT LAYOUT
© 2008 Microchip Technology Inc.
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
Select the Help menu, and then Topics to open a list of available on-line help files.
This chapter contains general information that will be useful to know before using the
MCP6V01 Thermocouple Auto-Zeroed Reference Design. Items discussed in this
chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
This document describes how to use the MCP6V01 Thermocouple Auto-Zeroed
Reference Design as a development tool to emulate and debug firmware on a target
board. The manual layout is as follows:
• Chapter 1. “Product Overview” - Provides the important information about the
• Chapter 2. “Installation and Operation” – Covers the installation and operation
• Appendix A. “Schematic and Layout” – Shows the schematic and board
• Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the
MCP6V01 Thermocouple Auto-Zeroed Reference Design.
of the MCP6V01 Thermocouple Auto-Zeroed Reference Design. It shows how to
set up the board, and demonstrates how to verify the operation.
layouts for the MCP6V01 Thermocouple Auto-Zeroed Reference Design.
MCP6V01 Thermocouple Auto-Zeroed Reference Design.
AUTO-ZEROED REFERENCE DESIGN
NOTICE TO CUSTOMERS
Preface
MCP6V01 THERMOCOUPLE
®
IDE on-line help.
DS51738B- page 1