DK-35TS-LPC2478 Future Designs Inc, DK-35TS-LPC2478 Datasheet

Page 1

ES_LPC2478 Errata sheet LPC2478 Rev. 6 — 1 March 2011 Document information Info Content Keywords LPC2478 errata Abstract This errata sheet describes both the known functional problems and any deviations from the electrical specifications known at the release date of ...

Page 2

NXP Semiconductors Revision history Rev Date Description • 6 20110301 • 5 20100401 • • 4 20100209 • 3 20090814 • 2 20090511 • 1 20081126 Contact information For more information, please visit: For sales office addresses, please send an ...

Page 3

NXP Semiconductors 1. Product identification The LPC2478 devices typically have the following top-side marking: LPC2478xxx xxxxxxx xxYYWWR[x] The last/second to last letter in the third line (field ‘R’) will identify the device revision. This Errata Sheet covers the following revisions ...

Page 4

NXP Semiconductors 3. Functional problems detail 3.1 Ethernet.1: Ethernet TxConsumeIndex register does not update correctly after the first frame is sent Introduction: The transmit consume index register defines the descriptor that is going to be transmitted next by the hardware ...

Page 5

NXP Semiconductors 3.2 Core.1: Incorrect update of the Abort Link register in Thumb state Introduction: If the processor is in Thumb state and executing the code sequence STR, STMIA or PUSH followed relative load, and the STR, ...

Page 6

NXP Semiconductors 3.3 ADC.1: External sync inputs not operational Introduction: In software-controlled mode (BURST bit is 0), the 10-bit ADC can start conversion by using the following options in the A/D Control Register: Fig 1. A/D control register options Problem: ...

Page 7

NXP Semiconductors 4. AC/DC deviations detail 4.1 IRC.1: Accuracy of the Internal RC oscillator (IRC) frequency may be outside of the 4 MHz +/ specification only at extreme temperatures Introduction: The device has a 4 MHz internal RC ...

Page 8

NXP Semiconductors 4.2 IRC.2: Accuracy of the Internal RC Oscillator (IRC) frequency for devices only with date codes 0949 and before are outside of the 4 MHz +/ specification only at temperatures between 20 C and 40 C ...

Page 9

NXP Semiconductors 6. Legal information 6.1 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give ...

Page 10

NXP Semiconductors 7. Contents 1 Product identification . . . . . . . . . . . . . . . . . . . . 3 2 Errata overview . . . . . . . . . ...