MCP9700DM-PCTL Microchip Technology, MCP9700DM-PCTL Datasheet - Page 13

• Manufacturer Part Number: MCP9700DM-PCTL
• Description: BOARD DEMO FOR PICTAIL MCP9700
• Manufacturer: Microchip Technology
• Series: PICtail™r

Specifications of MCP9700DM-PCTL

• Sensor Type: Temperature
• Sensing Range: -40°C ~ 125°C
• Interface: Analog
• Sensitivity: ±1°C
• Voltage - Supply: 2.3 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: MCP9700
• Processor To Be Evaluated: MCP9700
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

© 2006 Microchip Technology Inc.
2.3.2
1. Download and install the PICkit 1 Flash Starter Kit software to your PC.
2. Copy the 00059R1.HEX file supplied on the CD that came with this kit to your
3. Once the PICkit 1 Flash Starter Kit is started, the main window will be displayed
FIGURE 2-4:
4. Toggle device power to off by unchecking the Device Power box under Board
5. Click on the Erase button in the window to ensure that the PIC16F676 device has
6. From the File pull down menu, select Import HEX. A file window will appear.
7. Click on the Write Device button in the PICkit 1 Flash Starter Kit window. The
8. Toggle the device power on by checking the Device Power box under Board
PC.
on the PC, as indicated in Figure 2-4.
Controls in the PICkit 1 Flash Starter Kit window (Figure 2-4). The BUSY LED
on the PICkit 1 Flash Starter Kit board will turn off once the device power is turned
off.
been erased.
Select and open “00059R1.HEX”.
PIC16F676 device will be written to with the 00059R1.HEX firmware. When
completed, the status bar at the bottom of the window will indicate Write
Successful.
Controls in the PICkit 1 Flash Starter Kit window. The BUSY LED on the PICkit
1 Flash Starter Kit board will turn on once the device power is turned on. Some
of the red LEDs (D7-D0) will turn on as well.
Programming the PIC16F676
PICkit™ 1 Flash Starter Kit GUI Window on the PC.
DS51542B-page 9