TMPSNSRD-TCPL1 Microchip Technology, TMPSNSRD-TCPL1 Datasheet - Page 16

• Manufacturer Part Number: TMPSNSRD-TCPL1
• Description: BOARD RTD REFERENCE DESIGN
• Manufacturer: Microchip Technology

Specifications of TMPSNSRD-TCPL1

• Sensor Type: Temperature, Thermocouple
• Embedded: No
• Utilized Ic / Part: MCP3421, MCP9804
• Processor To Be Evaluated: MCP9804, MCP3421
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -
• Interface: -
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Mindi™ Amplifi er Designer & Simulator
The Mindi Amplifi er Designer & Simulator is an Application
Circuit that generates full schematic diagrams of an amplifi er
circuit with recommended component values and displays
the signal responses in frequency and time domains.
This application circuit allows the following designs:
■
■
■
■
■
■
■
■
Once the amplifi er characteristics have been identifi ed,
the Mindi Amplifi er Designer & Simulator can generate and
simulate the schematic of the amplifi er circuit. For maximum
design fl exibility, changes in resistor and capacitor values
can be implemented to fi t the demands of the application.
The tool also generates a Design Summary of the designed
amplifi er, including Design Requirements, Application
Schematic, Result Plot and Bill of Materials (BOM). Users
can directly download the schematic, BOM and Mindi offl ine
version.
16
Mindi








Inverting Amplifi er
Non-inverting Amplifi er
Voltage Follower
Difference Amplifi er
Inverting Summing Amplifi er
Inverting Comparator
Inverting Differentiator
Inverting Integrator
Signal Chain Design Guide
™
Amplifier Designer & Simulator
Mindi™ Active Filter Designer & Simulator
The Mindi Active Filter Designer & Simulator is an Application
Circuit within the Mindi Circuit Designer & Simulator that
provides full schematic diagrams of the active fi lter circuit
with recommended component values and displays the signal
responses in frequency and time domains.
The Mindi Active Filter Designer & Simulator allows the
design of low-pass fi lters up to an 8th order fi lter with
Chebychev, Bessel or Butterworth approximations from
frequencies of 0.1 Hz to 1 MHz. It also can be used to
design band-pass and high-pass fi lters with Chebychev and
Butterworth approximations. The circuit topologies supported
by the tool are the Sallen Key and Multiple Feedback (MFB).
The low-pass fi lters can use either the Sallen Key or MFB, the
band-pass fi lter is available with the MFB and the high-pass
fi lter uses the Sallen Key.
Users can select a fl at pass-band or sharp transition from
pass-band to stop-band. Other options, such as minimum
ripple factor, sharp transition and linear phase delays are
available. Once the fi lter characteristics have been identifi ed,
the Mindi Active Filter Designer & Simulator can generate
and simulate the schematic of fi lter circuit. For maximum
design fl exibility, changes in resistor and capacitor values can
be implemented to fi t the demands of the application. The
tool will recalculate all values to meet the desired response,
allowing real-world values to be substituted or changed as
part of the design process. The tool also generates a Bill of
Materials (BOM) of the designed fi lter.
Both of these tools are available on the Microchip web site
(www.microchip.com)
on the Mindi home page
The op amps and evaluation boards can also be ordered
from the Microchip web site.
under “Design & Simulation Tools” or
(http://www.microchip.com/mindi).