ATEVK1100 Atmel, ATEVK1100 Datasheet - Page 7

• Manufacturer Part Number: ATEVK1100
• Description: KIT DEV/EVAL FOR AVR32 AT32UC3A
• Manufacturer: Atmel
• Series: AVR®32r
• Type: MCUr

Specifications of ATEVK1100

• Contents: Evaluation Board, Software and Documentation
• Processor To Be Evaluated: AT32UC3A
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Core Sub-architecture: AVR32
• Silicon Core Number: AT32UC3A
• Silicon Family Name: AVR
• Rohs Compliant: Yes
• For Use With/related Products: AT32UC3A128, 256, 512, 1128, 1256, 1512
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 3
Hardware preparation
In case you have an evaluation kit without the MICTOR38 connector, you need to install one. In case the
connector is already mounted, you can skip this chapter.
To be able to connect to the evaluation board AUX port, you need to solder a connector to the board.
The AVR ONE! Kit contains one MICTOR38 connector for this purpose. If you need more connectors for
other kits, or your own designs, you can buy more connectors from Atmel, or Tyco Electronics/AMP.
The Tyco Electronics/AMP Part number is 2-5767004-2.
To install the MICTOR38 connector, you only need a fine-tipped soldering iron, a small piece of fine sol-
der (0,3mm is OK), and some extra flux. Also remember to provide proper ventilation to prevent inhaling
the fumes from the flux.
The soldering guide shows the EVK1100, but is applicable for all other kits that needs a MICTOR38 con-
nector (like the EVK1101).
Figure 3-1.
Required hardware and tools for installation of Mictor38
AVR ONE! Quick-start Guide
3-1
32103C–AVR ONE!–02/10