DEMOJM Freescale Semiconductor, DEMOJM Datasheet - Page 45

• Manufacturer Part Number: DEMOJM
• Description: KIT DEMO FOR JM MCU FAMILY
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: MCUr

Specifications of DEMOJM

• Contents: Base Board, JM60 and JM128 Daughter Cards, Documentation and Software
• Processor To Be Evaluated: MC9S08JM60
• Data Bus Width: 32 bit
• Interface Type: USB
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire, HCS08
• Core Sub-architecture: Coldfire V1, HCS08
• Silicon Core Number: MCF51, MC9S08
• Silicon Family Name: Flexis - MCF51JM, Flexis - S08JM
• Rohs Compliant: Yes
• For Use With/related Products: MCF51JM128, MC9S08JM60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

11.2
DEMOJM User Manual
CodeWarrior Installation Fails (WinDriver Error)
If the Multilink device does not show up in the device manager, use the driver
installation utility located in the DEMOJM Resources on the DVD-ROM. After
driver installation, unplug the DEMOJM from the PC and reboot the PC. When
the reboot has completed, connect the interface to the PC with the USB 2.0
cable. Run the software again to see if the interface is now detected.
If you have an error attempting to install the drivers, please view the
installation troubleshooting FAQ on P&E’s website at:
http://www.pemicro.com/faqs/faq_view.cfm?id=89.
(C) Test for installation of the USB driver files
To test the driver installation, use the driver test utility in the DEMOJM
Resources of the DVD-ROM to make sure all files were properly installed.
This may give some indication of what the problem is.
(D) Using a USB Hub
The DEMOJM is a high-power USB device. If a USB Hub is used, it must be a
self-powered hub (i.e., with its own power supply). If the Hub is not self-
powered the DEMOJM will not work. In general, USB ports located directly on
the PC are high-power (self-powered) ports.
Q: When I try to install the Codewarrior or P&E software, installation fails with
this message: “There are currently 2 open applications using WinDriver.
Please close all applications and press Retry. To reload WinDriver, press
Cancel and reboot.” How do I solve this?
A: Some software applications on your PC are connected to the WinDriver
system driver which manages P&E's USB connections. This system driver
needs to be disabled for the installation to continue. Directions to disable
Windriver are as follows:
In Windows Explorer, right-click on My Computer and select Properties from
the drop-down menu.
1. Select the Hardware tab.
2. Click on the Device Manager button.
3. Select the "System Devices" in the Device Manager window.
4. Expand the tree index (+) for System Devices.
5. At the bottom of the System Devices list you should see the Win-
41