101-1274 Rabbit Semiconductor, 101-1274 Datasheet - Page 103
![KIT DEV STANDARD RCM5700](/photos/9/21/92158/101-1274_sml.jpg)
101-1274
Manufacturer Part Number
101-1274
Description
KIT DEV STANDARD RCM5700
Manufacturer
Rabbit Semiconductor
Series
MiniCore™r
Type
MCUr
Datasheet
1.20-101-1306.pdf
(119 pages)
Specifications of 101-1274
Interface Type
Ethernet, SPI
Operating Temperature Range
- 40 C to + 85 C
Product
Modules
Silicon Manufacturer
Rabbit Semiconductor
Silicon Family Name
RabbitCore
Kit Contents
Board
Features
10/100 Base-T Ethernet, Serial To Ethernet Bridge
Development Tool Type
Development Kit
Rohs Compliant
Yes
For Use With/related Products
RCM5700
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Contents
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
316-1151
F.7 Where Do I Go From Here?
If there are any problems at this point:
• Use the Dynamic C
• Check the Rabbit Technical Bulletin Board and forums at
• Use the Technical Support e-mail form at www.rabbit.com/support/.
If the sample programs ran fine, you are now ready to go on.
Additional sample programs from the
TCP/IP User’s Manual.
Please refer to the Dynamic C TCP/IP User’s Manual to develop your own applications. An Intro-
duction to TCP/IP provides background information on TCP/IP, and is available on the CD and on
our
MiniCore RCM5700/RCM6700 User’s Manual
As long as you have not modified the
following server address in your Web browser to bring up the Web page served by the sample
program.
Otherwise use the TCP/IP settings you entered in the
Now compile and run the sample program. With the Hyperterminal client active (click on the
Hyperterminal window appearing on your PC desktop), anything you type on your keyboard
will be echoed back by the Rabbit and will appear in the Web browser. Note that you will not
see what you are typing in the active window unless you have enabled the local echo.
This sample program uses the RabbitWeb HTTP enhancements to configure a simple Ethernet-
to-serial converter. The sample program only supports listening TCP sockets, meaning that
Ethernet-to-serial devices can only be started by another device initiating the network connec-
tion to the Rabbit.
Each serial port can be associated with a specific TCP port. The Rabbit will listen on each of
these TCP ports for a connection, which will then be associated with a specific serial port. Data
will then be shuttled between the serial and Ethernet connections.
www.rabbit.com/forums/.
Web
http://10.10.6.100
Bits per second:
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
NOTE: If you purchased your MiniCore through a distributor or through a Rabbit partner, contact
site.
the distributor or partner first for technical support.
115200
Help
menu to get further assistance with Dynamic C.
SAMPLES\TCPIP
TCPCONFIG 1
rabbit.com
folder are described in the Dynamic C
TCP_CONFIG.LIB
macro in the sample program, enter the
www.rabbit.com/support/bb/
library.
and at
103