CAN-100 Fujitsu Semiconductor America Inc, CAN-100 Datasheet - Page 15

• Manufacturer Part Number: CAN-100
• Description: BOARD EVAL RS232 100QFP
• Manufacturer: Fujitsu Semiconductor America Inc
• Series: FRr
• Type: MCUr

Specifications of CAN-100

• Contents: Board, BLDC Motor, Cables, Power Supply
• For Use With/related Products: MB91F267N
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 865-1102

“Table 1-2 Description of the respective board parts” provides descriptions of the respective board parts.
No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
Name
Target device
Target device oscillator
CAN transceiver
CAN connector
USB to UART converter
USB connector
Motor driver circuit
Motor connector
DC jack
Mode SW
Reset SW
Test switches
LED lamps
Temperature sensor
Fuse
Extension pins
Jumper pins (JP1, JP2)
Table 1-2 Description of the respective board parts
Function
MB91F267N
CSTCR4M00G15C
MAX3058ASA+
3-pin connector
FT232RL
miniB
3-phase motor driver
circuit
8 pins
-
Slide switch
Push switch
Push switch x 2
Slide switch x 1
LED (green) x 6
LED (red) x 3
NTCG164BH103
0217001P
-
-
- 15 -
Description
Main microcontroller (MB91F267N).
Ceralock made by Murata Manufacturing
Oscillator for the main microcontroller.
Transceiver IC for CAN communication.
Connector for CAN communication.
Connect this connector to the CAN connector on the
bits pot white.
IC for conversion between UART and USB.
USB connector for connection with the PC to
write/debug a program.
Driver circuit for 3-phase motor operation by the main
microcontroller.
Connector for connection with the 3-phase motor
included in the kit.
Power connector for the operation of the motor.
Switch for selection of operation mode of the board.
Switch to reset the board.
Connected to the general-purpose I/O port.
The sample program uses this switch for motor rotation.
General-purpose LED lamps.
NTC thermistor made by TDK
Temperature sensor connected to the A/D converter.
Fuse for the 12-V power supply.
Extension pins of the main microcontroller.
For details, see the circuit diagram.
Jumper pins for USB-UART conversion setting.
UART communication handshake setting.
1-2: Handshake by software.
2-3: Handshake by hardware.
The default setting is 2-3 (common to JP1/JP2).
AN07-00180-3E