DEMO9RS08KA2 Freescale Semiconductor, DEMO9RS08KA2 Datasheet - Page 13

• Manufacturer Part Number: DEMO9RS08KA2
• Description: DEMO BOARD FOR 9RS08KA2
• Manufacturer: Freescale Semiconductor
• Series: RS08r
• Type: MCUr

Specifications of DEMO9RS08KA2

• Contents: Board, Cable, CD, Documentation, Sample ICs
• Processor To Be Evaluated: RS08KA2
• Data Bus Width: 8 bit
• Interface Type: USB
• Silicon Manufacturer: Freescale
• Core Architecture: RS08
• Core Sub-architecture: RS08
• Silicon Core Number: MC9RS08
• Silicon Family Name: RS08KA
• Rohs Compliant: Yes
• For Use With/related Products: MC9RS08KA2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4 Hardware Setup
4.1 First Connection
The Demonstration Board is connected to a host PC through a USB port. Connection steps
are listed below in the recommended flow order:
1.
2.
3.
4.
5.
6.
7.
Install all the required system software as described in the previous section.
Make sure the “POWER SEL” jumper is in the “USB” position.
Make sure the “VDD” jumper is in the “ENABLE” position.
Insert one end of the USB cable into a free USB port of the PC.
Insert the other end of the USB cable into the USB connector on the Demonstration
Board. The “POWER” LED will turn on.
The first time the Demonstration Board is connected to the PC, Windows recognizes the
instrument and starts the “Found New Hardware Wizard” procedure, asking you to
specify the driver to use for the instrument. On Windows XP (SP2) the following dialog
box will appear.
Select the “No, not this time” option and click the “Next >” button.
The following dialog box will appear.
DEMO9RS08KA2 User's Manual
Page 11