M52221DEMO Freescale Semiconductor, M52221DEMO Datasheet - Page 10

• Manufacturer Part Number: M52221DEMO
• Description: BOARD DEMO FOR MCF52221
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: MPUr

Specifications of M52221DEMO

• Contents: SBC, Cables and Software
• Processor To Be Evaluated: MCF52221
• Data Bus Width: 32 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire
• Core Sub-architecture: Coldfire V2
• Silicon Core Number: MCF52
• Silicon Family Name: MCF5222x
• Rohs Compliant: Yes
• For Use With/related Products: MCF52221
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MCF52223 Family Configurations
1.2.8
The MCF52223 has three full-duplex UARTs that function independently. The three UARTs can be clocked by the system bus
clock, eliminating the need for an external clock source. On smaller packages, the third UART is multiplexed with other digital
I/O functions.
1.2.9
The I
interconnection between devices. This bus is suitable for applications requiring occasional communications over a short
distance between many devices.
1.2.10
The queued serial peripheral interface (QSPI) provides a synchronous serial peripheral interface with queued transfer capability.
It allows up to 16 transfers to be queued at once, minimizing the need for CPU intervention between transfers.
1.2.11
The fast ADC consists of an eight-channel input select multiplexer and two independent sample and hold (S/H) circuits feeding
separate 12-bit ADCs. The two separate converters store their results in accessible buffers for further processing.
The ADC can be configured to perform a single scan and halt, a scan when triggered, or a programmed scan sequence repeatedly
until manually stopped.
The ADC can be configured for sequential or simultaneous conversion. When configured for sequential conversions, up to eight
channels can be sampled and stored in any order specified by the channel list register. Both ADCs may be required during a
scan, depending on the inputs to be sampled.
During a simultaneous conversion, both S/H circuits are used to capture two different channels at the same time. This
configuration requires that a single channel may not be sampled by both S/H circuits simultaneously.
Optional interrupts can be generated at the end of the scan sequence if a channel is out of range (measures below the low
threshold limit or above the high threshold limit set in the limit registers) or at several different zero crossing conditions.
1.2.12
There are four independent, DMA transfer capable 32-bit timers (DTIM0, DTIM1, DTIM2, and DTIM3) on the MCF52223.
Each module incorporates a 32-bit timer with a separate register set for configuration and control. The timers can be configured
to operate from the system clock or from an external clock source using one of the DTINn signals. If the system clock is selected,
it can be divided by 16 or 1. The input clock is further divided by a user-programmable 8-bit prescaler that clocks the actual
timer counter register (TCRn). Each of these timers can be configured for input capture or reference (output) compare mode.
Timer events may optionally cause interrupt requests or DMA transfers.
1.2.13
The general purpose timer (GPT) is a four-channel timer module consisting of a 16-bit programmable counter driven by a
seven-stage programmable prescaler. Each of the four channels can be configured for input capture or output compare.
Additionally, channel three, can be configured as a pulse accumulator.
A timer overflow function allows software to extend the timing capability of the system beyond the 16-bit range of the counter.
The input capture and output compare functions allow simultaneous input waveform measurements and output waveform
generation. The input capture function can capture the time of a selected transition edge. The output compare function can
10
2
C bus is a two-wire, bidirectional serial bus that provides a simple, efficient method of data exchange and minimizes the
UARTs
I
QSPI
Fast ADC
DMA Timers (DTIM0–DTIM3)
General Purpose Timer (GPT)
2
C Bus
MCF52223 ColdFire Microcontroller, Rev. 2
Freescale Semiconductor