R0K33026AS000BE Renesas Electronics America, R0K33026AS000BE Datasheet - Page 5

• Manufacturer Part Number: R0K33026AS000BE
• Description: KIT DEV EVALUATION M16C/26A
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K33026AS000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: M16C/26A
• Lead Free Status / RoHS Status: Not applicable / Not applicable

26. Select the Debug build configuration in the left hand drop
27. Click on the “Build” icon to compile, assemble and link the project.
4. Programming and Debug
28. Ensure the “SessionM16C_E8a_SYSTEM” session in the
29. Click the <Connect> button on the debug toolbar.
30. The “Emulator mode” dialog will be shown.
31. Select “Erase Flash and Connect”.
32. If the E8a is to provide power to the CPU board,
33. Click <Next>.
34. Enter FF000 for the firmware location. It is
35. Enter 0B00 for the Work RAM location. It is
36. Ensure that the checkbox “Debugging of program
37. Click <Next>.
down list on the toolbar.
right hand drop down list on the toolbar is selected.
Select the correct MCU group and device type
(e.g. M16C/26A Group and M30260F8 for
E8A_RSKM16C26A).
select “Power Target from Emulator” and choose
the “5.0V” option.
recommended that the firmware location is towards
the top of the memory map.
recommended that the Work RAM is towards the
top of the memory map.
that uses WDT” is not checked.
Please note that the “Emulator mode” dialog
shown here will only appear the FIRST time
you connect to the target within a project. On
subsequent
setting” dialog will appear, please choose the
same options to connect.
Otherwise connect a 5V centre positive supply.
connections
the
“Emulator