M5484LITEKITE Freescale Semiconductor, M5484LITEKITE Datasheet - Page 16

• Manufacturer Part Number: M5484LITEKITE
• Description: KIT DEV FOR MCF548X FAMILY
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: MPUr

Specifications of M5484LITEKITE

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MCF548x
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet
• For Use With/related Products: MCF548x
• For Use With: 460-1028 - CABLE DISP FREESCALE M5475,85EVB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Adding a New Userland Application to the Project With PCS
11
All paths are given relative to the project's folder.
For more detailed information about .lbc and .ecd files format, refer to PCS documentation.
12
Table 2
16
1. Go to 'config-data/buildcontrol/board/' and copy one of the .lbc files (e.g.'sh.lbc') to
2. Edit this file (hello.lbc) making corrections to all necessary fields (bld_dir_name, makeb, makei,
3. Go to 'config-data/ecds/board/' and copy one of the .ecd files (e.g.'sh.ecd') to
4. Edit this file (hello.ecd) making corrections to all necessary fields. This file is responsible for
5. Copy the '.tar.gz' file with your application (e.g. 'hello.tar.gz') to 'packages/local/'.
6. Run PCS. Open the project. You should see you application in the component's list. Enable it and
'config-data/buildcontrol/local' with a new name (e.g. 'hello.lbc'). It will be used as the template.
pkg_file, etc.). This file is responsible for making and installing the application.
'config-data/ecds/local' with a new name (e.g. 'hello.ecd'). It will be used as the template.
creating the record in the project's configuration menu and connecting it with the application. It
also defines all the dependencies and requirements for the application.
choose 'Reinstall and Rebuild Current Component' from the menu. It will unpack hello.tar.gz file,
build it and install to romfs if necessary.
provides a revision history of this document.
Number
Adding a New Userland Application to the
Project With PCS
Revision History
Rev
0.2
0.1
0
To debug this application, make sure it is compiled with a ‘-g’ option. This
option can be added either to the application’s Makefile or to the ‘makeb’
section of the ‘hello.lbc’ file.
Release
07/2005
04/2005
02/2005
Date of
Added to NOTE on Page 1: PCS test info.
Added Cygwin NOTE on Page 1.
Initial customer-release version.
MCF547x/8x Linux BSP Quick Start, Rev. 0.2
Table 2. Revision History
NOTE
Substantive Changes
Freescale Semiconductor