M53015EVB Freescale Semiconductor, M53015EVB Datasheet - Page 6

• Manufacturer Part Number: M53015EVB
• Description: KIT DEVELOPMENT FOR MCF53015
• Manufacturer: Freescale Semiconductor
• Type: MPUr

Specifications of M53015EVB

• Contents: Board, Cables, Cards, Power Supply Kit
• Processor To Be Evaluated: MCF5301
• Data Bus Width: 32 bit
• Interface Type: Ethernet, USB, UART, SPI, I2C
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.6 V
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire
• Core Sub-architecture: Coldfire V3
• Silicon Core Number: MCF53
• Silicon Family Name: MCF5301x
• Rohs Compliant: Yes
• For Use With/related Products: MCF53015
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

the PC and the Board
Connect an Ethernet cable between
the PC and the board via the top
RJ45 jack (P2).
STEP
6
Connect an Ethernet
Cable Between
The default IP address of the board is
169.254.3.3. Typically, when you connect
your computer directly to the board,
the computer will default to an auto IP
address on the same subnet as the board
(169.254.x.x), requiring no setup.
NOTE: The PC may take a few minutes to default to
the auto IP address and make the connection.
If you have trouble connecting, configure
the IP address of the computer
manually via Start > Settings > Network
Connections > Local Area Connection.
Note your original TCP/IP settings, then
set your IP address to 169.254.3.4 and
your subnet mask to 255.255.0.0.
STEP
7
If Necessary, Manually
Setup TCP/IP on the PC