100-3020 Bluetechnix, 100-3020 Datasheet - Page 26

• Manufacturer Part Number: 100-3020
• Description: KIT BLACKFIN STARTER CM-BF537E
• Manufacturer: Bluetechnix
• Type: DSPr

Specifications of 100-3020

• Contents: Board, Module, Power Supply
• For Use With/related Products: ADSP-BF537 Blackfin® Processor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DEV-BF5xxDA-lite V5.x Hardware User Manual
5.
6.
7.
This procedure has to be done twice, because at first the USB driver will be installed. Then the Hardware
Wizard opens again, because the UART bridge driver has to be installed in addition using the same driver
file. Simply repeat this step.
Open the Windows device manager (Control Panel  System  Hardware) to see which COM port number
has been assigned to the CP2101 UART-to-USB Chip. This number differs from computer to computer
based on the already installed COM ports. (e.g. COM4)
Open a Terminal program like the HyperTerminal included in Windows operating systems and open the
respective COM port with 115200 Baud, 8 Data-bits, No Parity and 1 Stop bit, disable the Hardware
flow control.
Reset the DEV-BF5xxDA-Lite Board (Press the main reset button). After this you will see the BLACKSheep
boot-screen showing up. If you disconnect the device, you have to reconnect.
25