AT91RM9200-EK Atmel, AT91RM9200-EK Datasheet - Page 9

• Manufacturer Part Number: AT91RM9200-EK
• Description: DEVEL KIT
• Manufacturer: Atmel
• Series: ARM®, Thumb®r
• Type: MCUr

Specifications of AT91RM9200-EK

• Contents: Development Board, AC adapter, Cables and Software
• Processor To Be Evaluated: AT91RM9200
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB
• For Use With/related Products: ARM920T
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: Q2427672

2.1
2.2
2.3
2.4
AT91RM9200-EK Evaluation Board User Guide
Electrostatic
Warning
Requirements
Powering Up the
Board
Getting Started
with the
AT91RM9200
The AT91RM9200-EK Evaluation Board is shipped in protective anti-static packaging.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
In order to connect the AT91RM9200-EK Evaluation Board, the following element is
required:
! The AT91RM9200-EK Evaluation Board itself
DC power is supplied to the board via the 2.1 mm socket (J1). The polarity of the power
supply is not critical. The minimum voltage required is 7V.
The board has three voltage regulators providing 1.8V, 3.3V and 5V. The regulators
allow the input voltage range to be from 7V to 12V.
The AT91RM9200-EK Evaluation Board is delivered with a DVD-ROM containing all
necessary information and step-by-step procedures for working with the most common
development tool chains. Please refer to this DVD-ROM, or to the AT91 web site,
http://www.atmel.com/products/AT91/
started with the AT91RM9200.
Setting Up the AT91RM9200-EK
for the most up-to-date information on getting
Evaluation Board
Rev. 6103C–ATARM–05-Jan-06
Section 2
2-1