DC-EM-KT Digi International, DC-EM-KT Datasheet - Page 85

• Manufacturer Part Number: DC-EM-KT
• Description: KIT INTEGRATION EM FOR S MODELS
• Manufacturer: Digi International
• Series: Digi Connect EM®r
• Type: MCU Moduler

Specifications of DC-EM-KT

• Contents: Module with plug-and-play firmware, Development Board, Documentation, CD, Cables and Power Supply
• For Use With/related Products: Digi Connect EM S Module
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 602-1003; DC-EM-01T-KT; DC-EM-02T-KT

Configure Mobile Settings
Configure Serial Ports
Port Numbers for Network Services
For each network service, the Port field shows the port on which the service is running.It
is usually best to use the default TCP port numbers for these services because they are
well known by most applications.
Configure Advanced Network Settings
The Advanced Network Settings are used to further define the network interface,
including:
The Mobile Settings identify the provider, service plan, and connection settings to connect
to the mobile network.
Use the Serial Port Configuration page to establish a port profile for the Connect device’s
serial port. The Serial Port Configuration page includes the following information:
Telnet: Enables or disables the Telnet service. If disabled, users cannot Telnet to
the to the device.
Whether Auto-IP address assignment is enabled or disabled.
The Ethernet Interface speed and duplex mode (Auto, Half-Duplex, or Full
Duplex).
For wireless products only, there is an advanced network setting of maximum
transmission rate.
The Service plan can be proxy, public, internet, or custom
Connection settings can be set up for both continuous sending and receiving
data.
The currently selected port profile for the serial port.
Detailed configuration settings for the serial port, dependent on the port profile
selected.
Links to Basic Serial Settings and Advanced Serial Settings.
C o n f i g u r i n g t h e D i g i C o n n e c t D e v i c e s
8 5