101-1109 Rabbit Semiconductor, 101-1109 Datasheet - Page 24

• Manufacturer Part Number: 101-1109
• Description: KIT EMBEDDED PLC APPLICATION
• Manufacturer: Rabbit Semiconductor
• Series: Coyoter
• Type: MPU Moduler

Specifications of 101-1109

• Contents: BL2500, ISaGRAF V3.50, Embedded PLC software kernel, ISaGRAF Programming Cable and Documentation
• For Use With/related Products: BL2500
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

EMBEDDED
5. On the Debugger window, select Options menu
7. Repeat this procedure for the rfstack application.
3.3 RUNNING APPLICATIONS THAT USE BL2500 INPUTS AND OUTPUTS
3.3.1 Creating I/O connectors
The
to connect to the I/Os of the BL2500.
To create an I/O connector you will need to assemble a wiring harness using the friction-lock connectors
and crimp terminals supplied with the
•
•
•
Follow these steps to build your wire harness:
1. Prepare a few lengths of wire about 30 cm (12") long. The wires should have different colours of
2. Trim about 2 – 3 mm (0.1") of insulation from your wire.
3. Position the wire in the crimp terminal as shown in the figure.
4. Use a crimp tool or pliers to first crimp the bare wire, then the
OEM Technology Solutions
→ Parameters. Change the Cyclic refresh
duration value to 200. This value corresponds to
the refresh rate of the SpotLight. Press OK button.
Wire—22 to 30 AWG (0.33 mm
to 0.13 mm
Wire cutters and wire insulation stripper
Crimp tool (pliers may be used, but a crimp tool provides a better crimp with a stronger force)
insulation to facilitate identifying the connections.
insulation as shown in figure.
EMBEDDED
Note:
On 10-pin friction-lock connectors, insert a plug into the hole indicated in last figure to polarize
your connector to help prevent offsetting the connector by one pin when you attach it to your
BL2500. Polarizing plugs are not included in
PLC BL2500 User’s Manual
2
PLC Application Kit comes with a bag of cables, connectors and crimp terminals in order
) for the 0.156" crimp terminals
2
to 0.049 mm
EMBEDDED
6. On the SpotLight window, double-click on the t#1s box.
5. Insert the crimp terminals with wires into the friction-
6. Repeat these steps until all the wires and crimp
Change the variable SPEED value to t#200ms and
press Write button. The bottle production will speed up
by a factor of two.
PLC Application Kit. In addition, you will need:
2
lock connector with the tab on the crimp terminal facing
the opening on the side of the friction-lock connector.
Insert the crimp terminal until the tab snaps into place
in the side opening.
terminals have been assembled.
) for the 0.1" crimp terminals, 22 to 26 AWG (0.33 mm
EMBEDDED
PLC Application Kit.
Running Sample Applications
Page 18
2