DEMO9S08SV16 Freescale Semiconductor, DEMO9S08SV16 Datasheet - Page 8
![BOARD DEMO FOR SV16 FAMILY](/photos/37/58/375883/demo9s08fl16_sml.jpg)
DEMO9S08SV16
Manufacturer Part Number
DEMO9S08SV16
Description
BOARD DEMO FOR SV16 FAMILY
Manufacturer
Freescale Semiconductor
Type
MCUr
Specifications of DEMO9S08SV16
Contents
Board
Processor To Be Evaluated
S08
Data Bus Width
8 Bit
Interface Type
USB, RS-232
Operating Supply Voltage
5 V
Silicon Manufacturer
Freescale
Core Architecture
HCS08
Core Sub-architecture
HCS08
Silicon Core Number
MC9S08
Silicon Family Name
S08SV
Kit Contents
Board, Quick Start Guide, User Guide
Rohs Compliant
Yes
For Use With/related Products
MC9S08SV
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
D E M O 9 S 0 8 S V 1 6 / F L 1 6
U S E R
POWER
The DEMO9S08SV16/FL16 may be powered from the integrated USB-BDM or from an on-
board voltage regulator and external power connector. The desired power source is selected
using the PWR_SEL option header.
For application development and debug, the board may be powered from the integrated USB
BDM. As noted above, total current consumption from this source is limited to 300 mA. A
2.0mm, center-positive, barrel connector (VIN) and on-board regulator supports stand-alone
operation and higher power requirements.
Power may also be applied to connector J1 or the board may be configured to supply power
from connector J1 to external circuitry.
POWER SELECT
Power may be applied to the board through the integrated BDM circuitry, a 2.0mm barrel
connector, or through connector J1. Power selection is achieved using 2 selection headers:
the PWR_SEL option header and the VX_EN option header.
PWR_SEL
The PWR_SEL option header allows the user to select power input either from either an
external power source connected to the VIN connector or from the integrated USB-BDM.
Figure 3 below details the PWR_SEL header connections.
Figure 3: V_SEL Option Header
G U I D E
Damage to the board may result if voltages greater than +5.5V are applied
VB
VB
PWR_SEL
PWR_SEL
Enable power to board from integrated BDM
Enable power to board from external power supply
VR1
VR1
at connector J1 input.
CAUTION:
8
J U N E
5 ,
2 0 0 9