5.07.01 FLASHER ARM Segger Microcontroller Systems, 5.07.01 FLASHER ARM Datasheet - Page 18

• Manufacturer Part Number: 5.07.01 FLASHER ARM
• Description: PROGRAMMER JTAG FOR ARM CORES
• Manufacturer: Segger Microcontroller Systems
• Type: In-System Programmerr

Specifications of 5.07.01 FLASHER ARM

• Contents: Programmer
• For Use With/related Products: ARM7, ARM9, Cortex
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1002

18
2.1.3
Flasher ARM (UM08007)
Table 2.1: Flasher ARM LEDs
When pressing the Start/Stop button of Flasher ARM while connecting it to the PC,
Flasher ARM will boot in the "MSD mode". This mode can be used to downdate a
Flasher ARM firmware version if a firmware update did not work properly and it can
be used to configure Flasher ARM for the "stand-alone mode", without using J-Flash.
If Flasher ARM has been configured for "stand-alone mode" before, there will be four
files on the MSD, FLASHER.CFG, FLASHER.DAT, FLASHER.LOG, SERIAL.TXT.
FLASHER.CFG contains the configuration settings for programming the target device
and FLASHER.DAT contains the data to be programmed. FLASHER.LOG contains all log-
ging information about the commands, performed in stand-alone mode. The
SERIAL.TXT contains the serial number, which will be programmed next. Currently, J-
Flash does not support to configure Flasher ARM for automated serial number pro-
gramming.
If you want to configure multiple Flasher ARM for the same target you do not have to
use J-Flash all the time. It is also possible to copy the FLASHER.CFG and the
FLASHER.DAT files from a configured Flasher ARM to another one. To copy these files
boot Flasher ARM in "MSD mode".
GREEN, slow blinking (1 kHz)
GREEN
RED
MSD mode
Status of LED
CHAPTER 2
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG
Erasing/Programming/Verifying opera-
tion is in progress.
Operation successful / Ready.
Operation failed.
Meaning
Working with Flasher ARM