R0E521000CPE00 Renesas Electronics America, R0E521000CPE00 Datasheet - Page 87

• Manufacturer Part Number: R0E521000CPE00
• Description: EMULATOR COMPACT FOR R8C/TINY
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E521000CPE00

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: R8C/Tiny
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

R0E521000CPE00 User’s Manual
5.2 When the Emulator Debugger Does Not Start Up Properly
5.2.1 When the LEDs of the Emulator Do Not Display Normally
Table 5.1 Errors LEDs show and their checkpoints
5.2.2 MCU Setting Dialog Box Does Not Appear at Emulator Debugger Startup
Table 5.2 Checkpoints of errors at emulator debugger startup
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 85 of 92
LEDs do not light up.
Target Status POWER LED does
not light up.
Target Status CLOCK LED does
not light up.
Target Status RESET LED does
not go out.
Communication error occurred.
Data was not sent to the target.
Not compact emulator.
Error
Error
the user system
Not connected
Connection to
Connected
Connected
Connected
-
Check that the USB cable is connected properly.
See "2.6 Connecting the Host Machine" (page 31).
Check that an emulator other than the compact emulator (such as
PC4701, PC7501) is not connected.
(1) Check that both the main and sub clocks of the emulator
Check that the power cable is connected.
See "2.5 Connecting a Power Supply" (page 30).
Check that power is properly supplied to the user system and that
the user system is properly grounded.
(2) Check that the oscillator circuit board is properly installed in
(1) When the clock is supplied from an external oscillator, check
(2) Check that the switches in the emulator main unit are set
Check that the reset pin of the user system is held high.
that the oscillator circuit in the user system is oscillating
properly.
properly.
“2.3.2 Setting the Jumpers on the R0E521000EPBM0 Board”
(page 23).
debugger are not set to "EXT".
See the CLK command of the emulator debugger.
the emulator and is oscillating.
See "2.3.4 Selecting Clock Supply" (page 25).
Checkpoint
Checkpoint
5. Troubleshooting