HS2678REPI61H-U Renesas Electronics America, HS2678REPI61H-U Datasheet - Page 27

no-image

HS2678REPI61H-U

Manufacturer Part Number
HS2678REPI61H-U
Description
EMULATOR BASE UNIT H8S/2678R FAM
Manufacturer
Renesas Electronics America
Type
Microcontrollerr
Datasheet

Specifications of HS2678REPI61H-U

Contents
E6000 Emulator and CD-ROM
For Use With/related Products
H8S/2678R
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
3.1
In the E6000, one evaluation chip emulates several types of MCU. Therefore, there are some
differences in I/O registers between an actual MCU and the E6000. Note these differences when
accessing the I/O registers.
I/O port is in the input state at default. The I/O register contents indicate the emulator port status.
When the user system interface cable is not connected, the read value is 1 due to the E6000 pull-
up resistors.
In the E6000, accesses to the following registers for controlling the flash memory are invalid.
3.2
When accessing the reserved area, note the following:
If the reserved area is used, the operation in the actual MCU cannot be guaranteed. If the user
program extends to the reserved area during debugging, select the MCU having the largest ROM
capacity (for example, debug the program for the H8S/2675R with the H8S/2676R memory
mapping).
RAM emulation register (RAMER: H'FEDB)
System control register 2 (SYSCR2: H'FF42)
Flash memory control register 1 (FLMCR1: H'FFC8)
Flash memory control register 2 (FLMCR2: H'FFC9)
Erase block register 1 (EBR1: H'FFCA)
Erase block register 2 (EBR2: H'FFCB)
I/O Register Differences between Actual MCU and E6000
Access to the Reserved Area
Section 3 Notes on Use
9

Related parts for HS2678REPI61H-U