IE-780078-NS-EM1 Renesas Electronics America, IE-780078-NS-EM1 Datasheet - Page 30

• Manufacturer Part Number: IE-780078-NS-EM1
• Description: BOARD EMULATOR 78K0 UPD78007X
• Manufacturer: Renesas Electronics America

Specifications of IE-780078-NS-EM1

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

28
CB
12
Remarks 1. The sections enclosed in broken lines indicate parts that are attached to the parts board.
3
<3> Make sure that the parts board (X2) is wired as shown in Figure 3-11.
<4> Remove the parts board that is mounted in the IE-780078-NS-EM1’s X2 socket.
<5> Connect the parts board from <2> above to the socket from which the parts board (from <4> above)
<6> Connect the IE-780078-NS-EM1 to the IE-78K0-NS or IE-78K0-NS-A.
The above steps configure the following circuit and enable supply of the clock from the mounted resonator to
the emulation device.
HCU04
4
10 MΩ
was removed. Check the pin 1 mark to make sure the board is mounted in the correct direction.
11
2. There is JP8 on the IE-78K0-NS or IE-78K0-NS-A.
13
10
2
5
HCU04
CA
Rx
9 8
Target
system
CHAPTER 3 INSTALLATION
User’s Manual U16226EJ3V0UM
1 3 5
2 4 6
JP8
IE-78K0-NS or IE-78K0-NS-A side
(Emulation device)