IE-789177-NS-EM1 Renesas Electronics America, IE-789177-NS-EM1 Datasheet - Page 22
![no-image](/images/manufacturer_photos/0/5/560/renesas_electronics_america_sml.jpg)
IE-789177-NS-EM1
Manufacturer Part Number
IE-789177-NS-EM1
Description
BD EMUL 78K0S 916X-9X/920X/921X
Manufacturer
Renesas Electronics America
Datasheet
1.IE-789177-NS-EM1.pdf
(49 pages)
Specifications of IE-789177-NS-EM1
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3.2 Clock Settings
3.2.1 Overview of clock settings
(1) Clock that is already mounted on emulation board
(2) Clock that is mounted by user
(3) Pulse input from target system
or “(2) Clock that is mounted by user”. For the clock oscillator, a resonator is connected to the target device and the
target device’s internal oscillator is used. An example of the external circuit is shown in part (a) of Figure 3-2. During
emulation, the oscillator that is mounted on the target system is not used. Instead, the clock that is mounted on the
emulation board installed in the IE-78K0S-NS or IE-78K0S-NS-A is used.
oscillator is not used. An example of the external circuit is shown in part (b) of Figure 3-2.
20
The main system and subsystem clocks to be used during debugging can be selected from (1) to (3) below.
If the target system includes a clock oscillator, select either “(1) Clock that is already mounted on emulation board”
If the target system includes an external clock, select “(3) Pulse input from target system”.
For the external clock, a clock signal is supplied from outside the target device and the target device’s internal
Caution The IE system will be hung-up if the main system clock is not supplied normally. Moreover, be
sure to input a rectangular wave as the clock from the target. There is no need to supply a clock
to the X2 pin.
(a) Clock oscillator
Figure 3-2. External Circuits Used as System Clock Oscillator
V
X1 or XT1
X2 or XT2
Target device
SS
CHAPTER 3 INSTALLATION
User’s Manual U14621EJ2V0UM
External
clock
(b) External clock
X1 or XT1
X2 or XT2
Target device