IE-780148-NS-EM1 Renesas Electronics America, IE-780148-NS-EM1 Datasheet - Page 31

• Manufacturer Part Number: IE-780148-NS-EM1
• Description: BOARD EMULATOR 78K0 UPD780148
• Manufacturer: Renesas Electronics America

Specifications of IE-780148-NS-EM1

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Remarks 1. The sections enclosed in broken lines indicate parts that are attached to the parts board.
<3> Make sure that the parts board (USCLK) is wired as shown in Figure 3-12.
<4> Remove the parts board that is mounted in the IE-780148-NS-EM1’s USCLK socket.
<5> Connect the parts board from <2> above to the USCLK socket from which the parts board (from <4>
<6> Install the IE-780148-NS-EM1 in the IE-78K0-NS or IE-78K0-NS-A.
The above steps configure the following circuit and enable supply of the clock from the mounted resonator to
the emulation device.
CB
12
3
above) was removed. Check the pin 1 mark to make sure the board is mounted in the correct direction.
2. JP8 is on the IE-78K0-NS or IE-78K0-NS-A.
HCU04
4
10 MΩ
11
13
10
2
5
HCU04
Rx
CA
9 8
Target
system
CHAPTER 3 INSTALLATION
User’s Manual U16963EJ1V0UM
1 3 5
2 4 6
JP8
IE-78K0-NS or IE-78K0-NS-A side
(Emulation device)
29