QB-179F124-T30MC Renesas Electronics America, QB-179F124-T30MC Datasheet - Page 36

• Manufacturer Part Number: QB-179F124-T30MC
• Description: 179F IECUBE 30 SSOP T-TYPE
• Manufacturer: Renesas Electronics America

Specifications of QB-179F124-T30MC

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

34
Observe the following notes.
• Even when using the product without connecting a target system, connect and use the emulation probe and
• Do not turn off the target power supply (do not allow it to become lower than the POC voltage) during a break
• When inputting the external clock, input the square waveform with the same potential as the target device to the
• A WDT reset is not generated when an area for which the capacities of the internal ROM, internal high-speed
• An internal oscillator of IECUBE is used as the high-speed internal oscillator. Thus, because trimming is not
• The REGC pin is processed within IECUBE and is not connected externally. Thus the REGC pin cannot be
• If the power supply of the target system is OFF, even though IECUBE and the target system are connected, no
exchange adapter.
If the product is used without connecting the emulation probe and exchange adapter, a warning window is
displayed but use is possible.
(power supply can be turned off only during RUN).
clock pins (X2).
ROM, and internal expansion RAM are not set with the IMS and IXS registers is illegally accessed. Emulation is
performed with a fail-safe break.
required, the high-speed internal oscillator trimming register (R4MTRM2) cannot be emulated and actual
operation is not affected by accessing the high-speed internal oscillator trimming register (R4MTRM2).
emulated.
warning message will be displayed even if the debugger is started with “Target” setting set to “Not Connect”.
Preliminary User’s Manual U18586EJ1V0UM
CHAPTER 5 NOTES