E240 Atmel, E240 Datasheet - Page 10

• Manufacturer Part Number: E240
• Description: BOARD EVAL FOR QT240-IS QTOUCH
• Manufacturer: Atmel
• Series: Quantumr

Specifications of E240

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 427-1082

BOARD OPTIONS
9
Warning: Changing components on the board involves soldering and unsoldering; please take
care not to overheat the board or to leave excessive flux which can affect signal stability
and performance. If in doubt, clean the board with a commercial flux remover and dry it prior to
use.
Figure 5 — Jumper Positions Showing Default Configuration
The E240 as shipped is factory configured to operate in fast mode with spread spectrum
enabled, and with a 10-second recalibration delay. The user can re-configure the jumpers to
change these settings using zero-ohm 0603 SMD resistors or bits of fine wire.
See next page for available jumper combinations.