SUPERPROLX(ROHS) Xeltek, SUPERPROLX(ROHS) Datasheet - Page 15

• Manufacturer Part Number: SUPERPROLX(ROHS)
• Description: PROGRAMMER UNIVERSAL 48-PIN
• Manufacturer: Xeltek
• Series: SuperPro LXr
• Type: Universalr

Specifications of SUPERPROLX(ROHS)

• Contents: SuperPro LX Programmer, AC Adapter, Software CD, Parallel Cable, User's Manual
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet, 3,904 Devices Supported.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 415-1010; 415-1033; 415-1033; SUPERPRO LX; SUPERPROLX; SUPERPROLX

3.2.3 Options
1) Operation Option, including:
·Insertion Test, check the pin contact before programming
·ID Check, check device’s ID before programming
·Beeper On, beeper sound off when the operation succeed or fail
· Auto Increment, when programming add a number label to the designated place so that each chip has a
different label
·change the start and end address of programming zone of the device
·Verify Mode, according to the requests, select specific VCC voltage verification in order to check the
programming chip correctly
2) Edit Auto, in the Function Screen, every device has a basic Auto operation, which automatically
execute the operation of device step by step. Normally select the following programming steps,
·Erase
·Blank-_check
·Program
·Verify
·Security or Protect
3) Dev. Config, as for the chip requires configuration, it must be properly configured before
programming to ensure the chip can be used on the targeted system
4) Dev. Information, some devices have special requests or conventions of programming, so user should
adjust operation steps or buffer data after carefully read the text in the Dev. Information box
5) Production Mode, in order to program chip in large number, with the help of insertion test, users do
not need to use keyboard and mouse repeatedly, only simply inserting and plucking out the chip under
the Production Mode.
3.2.5 Program the Data in Memory Buffer into a Chip
If the chip package is not DIP encapsulation, user may need to buy the adapter according to the info in
the Adapter box. (Contact Xeltek for selection and purchase the adapters.)
Insert the chip properly into the socket; following by these steps:
·Blank Check, this step can be skipped if the chip is brand new
·Program