101-0506 Rabbit Semiconductor, 101-0506 Datasheet - Page 109

• Manufacturer Part Number: 101-0506
• Description: CARD CPU SR9160 128K SRAM SMRTST
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0506

• Accessory Type: Smart Star CPU Card
• For Use With/related Products: SR9160
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PARAMETER
RETURN VALUE
SEE ALSO
PARAMETER
RETURN VALUE
SEE ALSO
User’s Manual
int anaSaveCalib(int boardtype);
int anaLoadCalib(int boardtype);
The calibration constants may also be saved in the flash memory on the Smart Star CPU Card. Doing so
will speed up D/A conversions since a memory access from flash memory will be faster than from
EEPROM. Use anaSaveCalib to save the current set of calibration constants for the analog input or
output channels in the Smart Star flash memory. The calibration constants stored in flash memory can
then be accessed at any time with the anaLoadCalib function.
Calibration constants should first be established using anaOutCalib or obtained via anaOutEERd.
boardtype is the type of board, which is 0 for the D/A Converter Card, 1 for the A/D Converter Card.
0 if successful.
–1—attempt to write non-flash area, nothing written.
–2—rootSrc not in root.
–3—timeout while writing flash memory.
–4—attempt to write to ID block sector(s).
Reads a complete set of calibration constants for the analog output channels from the Smart Star flash
memory on the CPU Card. These should have been loaded to the flash memory with the anaSaveCa-
lib function.
boardtype is the type of board, which is 0 for the D/A Converter Card, 1 for the A/D Converter Card.
0 if successful.
–1—attempt to read from non-flash area.
–2—destination not all in root.
anaLoadCalib, anaOutCalib
anaSaveCalib, anaOutCalib
109